Cork Boring Machine

Designed to mount on any tabletop, the Humboldt Cork Boring Machine has an adjustable guide that permits holes to be bored in any part of a stopper. The knurled chuck accommodates the 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. The steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments. The machine dimensions are 6-1/2" L. x6-1/2" W. x11" H. (165mm x 165mm x 279mm).

Replacement Parts

H-9655 – Set of eight plated steel borers (same as included with machine above).

Cork Borer Sets with Handles

These inexpensive sets are used to bore holes in corks and rubber stoppers. They consist of plated tubing with precision ground cutting edges. The smooth plastic handles are stamped with a number designation, which corresponds to the table below. A punch is included with each set.

Cork Press

The Cork Press is a rotary compression device used for softening and tapering corks ranging in sizes from 0 to 22. The unit is cast aluminum and can be wall or bench mounted.

Overall dimensions: 10-3/8" W x 5-3/8" H x 3-1/4" D(264mm x 137mm x 83mm).

Multi-Blade Cork Borer Sharpener

Hollow ground cutting blades in a conical arrangement for fast, effective sharpening of cork borers. Blades are hardened tool steel for long life.

Cork Borer Sharpener

This handy tool is used to sharpen borers from 3/16" to 15/16" (5mm to 24mm). The solid brass cone has a hinged steel blade in a slot; mounted in a hardwood handle.