Specialty Clamps
Clamp Hook
The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).
Test Tube Clamp
This clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).
Thermometer Clamp
With a full 360° jaw rotation, this fully adjustable clamp is ideal for attaching to rods up to 3/4" (19mm) in diameter. The clamp has an aluminum muff with steel thumbscrew and phosphor bronze jaws. The maximum distance from the jaw to the muff is 4-3/8" (111mm) and the overall length is 5-1/2" (140mm).
Thermometer Clamp
Similar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The maximum distance from the jaw to the muff is 3-5/8" (92mm) and the overall length is 5-1/4" (133mm).