< Previouswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 SOIL MECHANICS 118 Data Acquisition and Control for both the HM-5432 semi-automatic consolidation machine and the HM-1100A dead-weight consolidation frame can be achieved with the use of one of Humboldt’s 4-channel data loggers. The touch- screen monitor of the data logger provides test control and live test monitoring in either a stand- alone or computer-controlled configuration. In the case of the HM-5432, pneumatic loads are controlled by manual valve controls located on the front panel of the consolidation machine. With the HM-1100A dead-weight loads are con- trolled by physically adding weights to the con- solidation frame. With both machines, the data logger provides four (4) integral and independent data acquisition channels, which can be utilized in stand-alone configurations or accessed through a LAN-networked computer using Humboldt’s NEXT Basic software. Stand-Alone Test Monitoring The touch-screen controller provides you with full, graphical monitoring of testing functions in a stand-alone application. The seven-inch, water- proof screen on the Humboldt Data Loggers pro- vides at-a-glance monitoring of testing functions, in a real-time graphical display, without the use of a computer, building upon Humboldt’s dedication to modular, stand-alone data acquisition. Now, in a stand-alone application, you will be able to run tests and display results while viewing tab- ulation, basic x-y graphs and instrument readings in real-time during the test, using user-defined, basic data acquisition. Test data is stored in the device and can be downloaded to a USB drive via the machine’s FRONT USB port or the data can be transferred to a computer via the LAN port. •4-channel data acquisition •Hi-res, 7", waterproof, touch-screen provides total control and real-time graphical display of tests •Machine/Test control and data acquisition via touch-screen Computer Test Monitoring Humboldt’s NEXT Basic software can be down- loaded from: https://www.humboldtmfg.com/ support/software.php for use with a Humboldt data logger and computer. This software provides basic data acquisition and report generation for those using a computer for this purpose. In addition, you can purchase Humboldt’s HM-5100SW Consolidation module for consoli- dation test-specific set up and monitoring of the testing function. •Data acquisition via a networked computer •Provides the ability to use Humboldt’s NEXT Software’s HM-5100SW consolidation module •Real-time graphical chart and numerical display of tests via computer display •Effective sampling rate of 50 readings/sec. • Stores 1000 tests with up to 3000 points per test. Consolidation *XX Requires a sample size designation, see page 120-121 for choices †More weight choices can be found on page 121. Humboldt Dead-weight Consolidation Frame ConMatic Semi-Automatic Consolidation Machine DATA ACQUISITION SETUPS FOR SEMI-AUTOMATIC AND DEAD-WEIGHT CONSOLIDATION Analog Data Acquisition Setup Data acquisition setup for Pneumatic consoli- dation using analog transducer and Logger ConMatic 32 TSF or ConMatic 32 Kgf/cm² HM-5432.3F or HM-5432M.3F Fixed ring consolidation cell HM-1220.XX* Strain transducer 0.4" (10mm) HM-2310.04 Strain transducer bracket HM-2310BR Humboldt Logger 4 channel analog data acquisition HM-5320.3F NEXT consolidation module HM-5100SW Data acquisition setup for Pneumatic con- solidation using digital indicator and Logger ConMatic 32 TSF or 32 Kgf/cm² HM-5432.3F or HM-5432M.3F Fixed ring consolidation cell HM-1220.XX* Digital indicator 1" x .0001" (25 x 0.002 mm) HM-4471.10 Digital Indicator Cable, 6 ft. HM-4470C Humboldt Logger 4 channel digital data acquisition HM-5330.3F NEXT consolidation module HM-5100SW Digital Data Acquisition Setup Data acquisition setup for Dead-weight con- solidation using digital indicator and Logger Dead weight consolidation frame HM-1100A Weight set, 16 TSF Weight set, 64 kg HM-1120 or HM-1123 Fixed ring consolidation cellHM-1220.XX* Digital indicator 1" x .0001" (25 x 0.002 mm) HM-4471.10 Digital Indicator Cable, 6 ft.HM-4470C Humboldt Logger 4 channel digital data acquisition HM-5330.3F NEXT consolidation moduleHM-5100SW Data acquisition setup for Dead-weight consol- idation using analog transducer and Logger HM-1100A Dead weight consolidation frame HM-1120 † or HM-1123 † Weight set, 16 TSF Weight set, 64 kg HM-1220.XX* Fixed ring consolidation cell HM-2310.04 Strain transducer 0.4" (10mm) HM-2310BR Strain transducer bracket HM-5320.3F Humboldt Logger 4 channel analog data acquisition HM-5100SW NEXT consolidation module Analog Data Acquisition Setup Digital Data Acquisition SetupSOIL MECHANICS Cell Components & Accessories www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 119 Fixed Ring Consolidation Cell ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 Complete cell assembly features stainless steel construction and self-trimming cutter ring. Cutter ring rests inside clamping ring on lower porous stone, which is larger than the sample. The top porous stone and loading pad rest on the sample. The assembly is fixed on the cell base and enclosed within an acrylic cylinder open to the atmosphere, which permits satura- tion of the sample. The cell comes complete with all the parts illustrated in the drawing below. Fixed Ring Consolidation Cell See Chart Shipping wt. 7.5 lb (3kg) Floating Ring Consolidation Cell ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 Complete cell assembly features stainless steel construction with self-trimming cutter ring. Similar in construction to a fixed ring cell with the exception that the lower porous stone fits inside the cutter ring and can move vertically within it. The sample ring is also free to move vertically. The cell comes complete with all the parts illustrated in the drawing below. Floating Ring Consolidation Cell See Chart Shipping wt. 6 lb (2.27kg) Fixed Ring Permeability Cell ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 Similar in construction to a fixed ring cell with the exception that the saturated sample and water are sealed from the atmosphere. Com- plete cell assembly features stainless steel construction and self-trimming cutter ring. Base features outlet port and 10cc pipette for monitoring water level. The cell comes com- plete with all the parts illustrated in the draw- ing below, as well as a pipette. Fixed Ring Permeability Cell See Chart Shipping wt. 12 lb (5.4kg) Fixed Ring Consolidation Cell 2.0"HM-1220.20 2.42"HM-1220.242 2.5"HM-1220.25 3.0"HM-1220.30 4.0"HM-1220.40 50mmHM-1220.50 70mmHM-1220.70 75mmHM-1220.75 100mmHM-1220.100 Fixed Ring Permeability Cell 2.0"HM-1230.20 2.42"HM-1230.242 2.5"HM-1230.25 3.0"HM-1230.30 4.0"HM-1230.40 50mmHM-1230.50 70mmHM-1230.70 75mmHM-1230.75 100mmHM-1230.100 See next page for component details NOTES Floating Ring Consolidation Cell 2.0"HM-1210.20 2.42"HM-1210.242 2.5"HM-1210.25 3.0"HM-1210.30 4.0"HM-1210.40 50mmHM-1210.50 70mmHM-1210.70 75mmHM-1210.75 100mmHM-1210.100www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 SOIL MECHANICS 120 Consolidation Cell Components Acrylic Cylinder (fixed–floating) 2" HM-1220.25.2 2.42" HM-1220.25.2 2.5" HM-1220.25.2 3.0" HM-1220.25.2 4.0" HM-1220.40.2 50mm HM-1220.25.2 70mm HM-1220.25.2 75mm HM-1220.25.2 100mm HM-1220.40.2 Cutting Ring (all) 2"HM-1220.20.8 2.42"HM-1220.24.8 2.5"HM-1220.25.8 3.0"HM-1220.30.8 4.0"HM-1220.40.8 50mmHM-1220.50.8 70mmHM-1220.70.8 75mmHM-1220.75.8 100mmHM-1220.100.8 Calibration Disk 2" HM-1220.20.4 2.42" HM-1220.24.4 2.5" HM-1220.25.4 3.0" HM-1220.30.4 4.0" HM-1220.40.4 50mm HM-1220.50.4 70mm HM-1220.70.4 75mm HM-1220.75.4 100mm HM-1220.100.4 Lower Stone (fixed, permeability) 2" HM-4184.331 2.42" HM-4184.331 2.5" HM-4184.331 3.0" HM-4184.331 4.0" HM-4184.4375T 50mm HM-4184.331 70mm HM-4184.331 75mm HM-4184.331 100mm HM-4184.4375T Base (fixed) 2" HM-1220.25.1 2.42" HM-1220.25.1 2.5" HM-1220.25.1 3.0" HM-1220.25.1 4.0" HM-1220.40.1 50mm HM-1220.25.1 70mm HM-1220.25.1 75mm HM-1220.25.1 100mm HM-1220.40.1 Lower Stone (floating) 2" HM-4184.1985T 2.42" HM-4184.240T 2.5" HM-4184.2485T 3.0" HM-4184.2985T 4.0" HM-4184.3985T 50mm HM-4184.1955T 70mm HM-4184.274T 75mm HM-4184.2940T 100mm HM-4184.3925T Base (floating/permeability) 2" HM-1230.25.1 2.42" HM-1230.25.1 2.5" HM-1230.25.1 3.0" HM-1230.25.1 4.0" HM-1230.40.1 50mm HM-1230.25.1 70mm HM-1230.25.1 75mm HM-1230.25.1 100mm HM-1230.40.1 Upper o-ring (permeability) 2" HM-003057 2.42" HM-003058 2.5" HM-003054 3.0" HM-003059 4.0" HM-003060 50mm HM-003057 70mm HM-003061 75mm HM-003062 100mm HM-003063 Upper Stone 2"HM-4184.1985 2.42"HM-4184.240 2.5" HM-1220.25.11 (stud) 2.5"HM-4184.2485 3.0"HM-4184.2985 4.0"HM-4184.3985 50mmHM-4184.1955 70mmHM-4184.274 75mmHM-4184.2940 100mmHM-4184.3925 Clamping Ring (permeability) 2"HM-1230.20.9 2.42"HM-1230.24.9 2.5"HM-1230.25.9 3.0"HM-1230.30.9 4.0"HM-1230.40.9 50mmHM-1230.50.9 70mmHM-1230.70.9 75mmHM-1230.75.9 100mmHM-1230.100.9 Clamping Ring (fixed) 2" HM-1220.20.9 2.42" HM-1220.24.9 2.5" HM-1220.25.9 3.0" HM-1220.30.9 4.0" HM-1220.40.9 50mm HM-1220.50.9 70mm HM-1220.70.9 75mm HM-1220.75.9 100mm HM-1220.100.9 Lower o-ring (fixed) 2" HM-003052 2.42" HM-003052 2.5" HM-003052 3.0" HM-003052 4.0" HM-003024 50mm HM-003052 70mm HM-003052 75mm HM-003052 100mm HM-003024 Load Pad 2" HM-1220.20.10 2.42" HM-1220.24.10 2.5" HM-1220.25.10 3.0" HM-1220.30.10 4.0" HM-1220.40.10 50mm HM-1220.50.10 70mm HM-1220.70.10 75mm HM-1220.75.10 100mm HM-1220.100.10 Centering Ring (floating) 2" HM-1210.20.12 2.42" HM-1210.24.12 2.5" HM-1210.25.12 3.0" HM-1210.30.12 4.0" HM-1210.40.12 50mm HM-1210.50.12 70mm HM-1210.70.12 75mm HM-1210.75.12 100mm HM-1210.100.12 Lower o-ring (floating/permeability) 2"HM-003053 2.42"HM-003053 2.5"HM-003053 3.0"HM-003053 4.0"HM-003056 50mmHM-003053 70mmHM-003053 75mmHM-003053 100mmHM-003056SOIL MECHANICS Cell Components & Accessories www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 121 Filter Paper 2" HM-4189.20 2.42" HM-4189.25 2.5" HM-4189.25 3.0" HM-4189.30 4.0" HM-4189.40 50mm HM-4189.20 70mm HM-4189.28 75mm HM-4189.30 100mm HM-4189.40 Post ALL HM-1220.25.3 Locking Nut ALL HM-1220.25.5 HM-1120 Lifting Knob ALL HM-1220.25.6 Port Connection Upper (Permeability) ALL HM-003027 Port Connection Lower (Permeability) ALL HM-003055 Individual Weights: TSF Weight Model No. 0.125 (1/8) HM-1120.125 0.25 (1/4) HM-1120.250 0.50 (1/2) HM-1120.500 1.0 HM-1120.1 2.0 HM-1120.2 4.0 HM-1120.4 Individual Weights: Kg Weight Model No. 0.5kg HM-1122.05 1.0kg HM-1122.1 2.0kg HM-1122.2 4.0kg HM-1122.4 5.0kg HM-1122.5 8.0kg HM-1122.8 10.0kg HM-1122.10 Individual Weights for Consolidation and Direct Shear Testing Weight SetSet IncludesModel No Ship Wt 16 TSF Set(2) .125 TSF, (1) .25 TSF, (1) .50 TSF, (1) 1.0 TSF, (1) 2.0 TSF, (3) 4.0 TSF weightsHM-1120 140 lbs. (64kg) 32 TSF Set(2) .125 TSF, (1) .25 TSF, (1) .50 TSF, (1) 1.0 TSF, (1) 2.0 TSF, (7) 4.0 TSF weightsHM-1121 275 lbs. (125kg) 32 kg Set(4) 1 kg, (3) 4 kg, (2) 8 kg weightsHM-1122 73 lbs. (33.1kg) 50 kg Set(3) 1 kg, (1) 2 kg, (1) 5 kg, (4) 10 kg weightsHM-1125 110 lbs. (50kg) 64 kg Set(4) 1 kg, (5) 4 kg, (5) 8 kg weightsHM-1123 150 lbs. (68kg ) 88 kg Setincludes: (4) 1 kg, (5) 4 kg, (8) 8 kg weightsHM-1124 130 lbs. (59kg) Weight Sets for Consolidation and Direct Shear Testing Shear & Consolidation Install Kit Components .25" OD Tubing, 100ft. HM-4196.25 .375" to .25" Reducer Bushing (3) HM-4150.77 Cutter, Flexible Tubing (1) HM-000058 Thread Tape, PTFE (1) HM-000059 Wrench, Adjustable, 6" (1) HM-000064 Union T Fitting, .25" (5) HM-4150.45 Quick Valve Coupling, .25" (2) HM-4150.72 Regulator Elbow, .25" (3) HM-4150.44 Tube Fitting T, 6mm OD (5) HM-003175 Push-to-Connect Tube Fitting Coupler, .25" OD (4) HM-003176 Pipette— 2 x 0.01ml HM-003139 HM-4168 Shear & Consolidation Installation Kit Kit designed to provide fittings, connectors, tubing and tools to complete an installation set up. Kit includes items in the table below. All items can be purchased individually as well, see chart to left. Shear & Consolidation Installation KitHM-4168 Shipping wt. 4.5 lbs (2.04kg) HM-1240.25 Trimming Turntable for 2.5" Specimens Trims samples down to correct sizing. Trimming Turntable, 2 5" SpecimensHM-1240 25 Shipping wt. . 5lb (2.27kg) 5/8"Pressure Ball (Stainless) ALL HM-001076 HM-003139www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 SOIL MECHANICS 122 Direct Shear, Pneumatic Automated Direct Shear Apparatus ASTM: D3080; AASHTO: T236, BS:1377:7 The Humboldt HM-5760 Direct/residual shear apparatus, utilizes pneumatic loading to apply vertical loads to a soil sample— eliminating the need for loading weights used in dead weight- type systems. The HM-5760 is a microprocessor-based machine featuring a stepper-motor drive system and a 7" touch-screen display that allows the operator to control and monitor all test functions. Like all Humboldt Elite series machines, the HM-5760 is built with durable, high-quality components and features the use of a stepper motor, precision gears and gear box to ensure smooth and reliable operation, as well as precise results. The HM-5760 is built around Humboldt’s integral, 4-channel data logger with touch-screen con- trol, which allows the HM-5760 to be used as a standalone device capable of full test control and data logging. It can also be controlled by a net- worked computer at any location with access to the network. In stand-alone mode, the HM-5760 direct shear machine provides a 7" (178mm) touch-screen controller, giving you finger-tip control of your testing processes, as well as providing real-time, visual views of your data in both tabular and graphic formats. The waterproof, touch screen provides colorful, at-a-glance monitoring of test- ing functions without the use of a computer. Oper- ators can see all the data in several formats at the machine while the test is running. Data can then be viewed simultaneously or downloaded later to a computer in the lab, in the next room or at a different location, while also providing report gen- eration capabilities from within Humboldt’s NEXT software or our enhanced HM-5700SW Direct Shear Reporting Software. When operated from a networked computer the NEXT software provides robust machine and test control, and report generation. It also provides the ability to control and monitor multiple machines from a single computer. The HM-5760 is supplied complete with (2) 2,000 lbf (10kN) capacity load cells; 1" (25.4mm) horizon- tal strain transducer, and a 0.4" (10.2mm) vertical strain transducer. Humboldt’s HM-5700SW NEXT Direct Shear software module is also included. Shear box assemblies and related accessories are not included and should be ordered separately. Humboldt’s exclusive, counter-balance device for ASTM D3080 compliance is included with the HM-5760. Automated Direct ShearHM-5760 3F Shipping wt. 168 lb (76kg) Automated Direct Shear ELITE SERIES HM-5760.3F UPGRADE Counter-balance device for ASTM D3080 compliance. Not available anywhere else. Also available as a retrofit kit. HM-2560A.1. HM-5760 3F Specifications: Horiz. movement 1" (25mm) Maximum Horiz. shear force 2000 lbf (10kN) Vertical load 2000 lbf (10kN) Data Channels 4 Speed Range 0.00001 to 0.49999 in./min. 0.00001 to 12.9999 mm/min. Dimensions (L x D x H) 30" x 15.5" x 22" (760 x 394 x 558mm) Voltage 110/220V 50/60Hz - 6.5amps Pneumatic Direct Shear System Requirements AC Supply 110/220 VAC 50/60 Hz 5 Amp Air Supply Clean and dry (air filter, water trap), minimum: 100psi (700kps) contin- uous air supply 4.2CFM (0.12m 3 /min)* *Larger compressor may be required if used with additional equipment or larger-sized labs.SOIL MECHANICS www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 123Direct Shear, Pneumatic Computer Control NEXT software and the enhanced Direct Shear module, HM-5700SW, is included with the HM-5760 pneumatic direct-shear machine. This software provides robust machine control, data acquisition and report generation for those using a computer to control direct shear testing operations. In addition, operators have the ability to view and control testing operations from a PC in the lab, in the next room or at a different location, while also providing report generating capabilities using the direct shear test-specific software module. So, whether you are controlling a single direct- shear machine, controlling multiple machines or even a complete geotechnical lab, Humboldt’s NEXT software, in conjunction with Humboldt’s HM-5760 Direct-shear machine, provides a com- plete solution for acquisition, recording and pre- sentation of direct-shear testing data in tabular and graphic chart formats. •Machine control, and data acquisition via a networked computer •Provides the ability to use Humboldt’s Next Software’s, advanced test-specific modules •Real-time graphical chart and numerical display of tests via computer display •Effective sampling rate of 320 readings per second • Stores 1000 tests with up to 3000 points per test • Up to 255 individual tests can be run simultaneously from a single PC • Provides advanced graphing capabilities • Provides full-unit customization • Reports can also be exported to Excel or a CSV file, if desired, and, we can provide custom inte- gration/export solutions for LIMS, EQuIS, gINT, etc. Controller Specifications: Display (Resistive Touch)7" (178mm) VGA (480 x 800) Real-time test dataGraphic and tabulation ProcessorDual 32-bit ARM RAM64MB Memory, non-volatile4GB Analog to digital converter 24 bit Data acquisition4 Channels Logging Rate effective rate of 320 readings per second Multi-test storage1000 Points per test3000 USB port (front) export data, import/export calibration data USB port (back) provides external power for wireless access point Ethernet connectionfor network connectivity 24-bit differential analog to digital converter 4 Ambient temperature sensor 1 Firmware UpdateFlash drive Typical Test Setup for HM-5760 DescriptionPart # Fully-Automatic Pneumatic Direct Shear (includes (2) 2,000 lbf (10kN) capacity load cells; 1" (25.4mm) horizontal strain transducer, and a 0.4" (10.2mm) vertical strain transducer) HM-5760.3F NEXT Direct Shear software module (included with HM-5760) HM-5700SW Shear box assembly (specify size) HM-2751.XX(S/D) Shear box cutter (specify size) HM-2702.XX(S/D) Dolly/tamper (specify size) HM-2703.XX(S/D) *XX Requires a sample size designation, see page 125 for choices Additional Items Required PC computer not supplied Direct Shear/Consolidation Installation Kit HM-4168 Desiccant Dryer, Silica Gel HM-4222 Filter/Regulator HM-4223www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 SOIL MECHANICS 124 Direct Shear Semi-Automated Direct Shear HM-5755.3F Semi-Automatic Direct Shear Apparatus ASTM: D3080; AASHTO: T236, BS:1377:7 The HM-5755 is a semi-automatic pneumatic loading machine, which with its touch-screen monitor provides test control and live test moni- toring in either a stand-alone or computer-con- trolled configuration. With the HM-5755, pneu- matic loads are controlled by manual valve con- trols located on the front panel for easy use. The HM-5755 also provides four (4) integral and inde- pendent data acquisition channels, which can be utilized in stand-alone configurations or accessed through a LAN-networked computer using Hum- boldt’s Next Software. In stand-alone mode, the HM-5755 direct shear machine provides a 7" (178mm) touch-screen controller, giving you finger-tip control of your testing processes, as well as providing real-time, visual views of your data in both tabular and graphic formats. These new waterproof, touch screens provide colorful, at-a-glance monitoring of testing functions without the use of a computer. Operators can see all the data in several formats at the machine while the test is running. Data can then be viewed simultaneously or downloaded later to a computer in the lab, in the next room or at a different location, while also providing report generation capabilities from within Humboldt’s NEXT software or our enhanced HM-5700SW Direct Shear software module. When operated from a networked computer the NEXT software provides robust machine and test control, and report generation. It also allows the ability to control and monitor multiple machines from a single computer. The HM-5755 is supplied complete with a 2,000 lbf (10kN) capacity load cell; 1" (25.4mm) hori- zontal strain transducer, a 0.4" (10.2mm) vertical strain transducer and Humboldt’s NEXT software. Shear box assemblies, Humboldt’s NEXT Direct Shear module and related accessories are not included and should be ordered separately. Semi-Automated Direct ShearHM-5755 3F Shipping wt. 200 lb (90.7kg) HM-5755 3F Specifications: Horiz. movement1" (25.4mm) maximum Horiz. shear force 2000 lbf (10kN) Vertical load2000 lbf (10kN) Data Channels 4 Speed Range 0.00001 to 0.49999 in./min. 0.00001 to 12.9999 mm/min. Voltage110/220 VAC 50/60HZ Current6.5 amps Dimensions (L x D x H) 30" x 15.5" x 22" (760 x 394 x 558mm) Pneumatic Direct Shear System Requirements AC Supply 110/220 VAC 50/60 Hz 5 Amp Air Supply Clean and dry (air filter, water trap), minimum: 100psi (700kps) continuous air supply 4.2CFM (0.12m 3 /min) NOTES This machine does not include HM-5700SW Software, order separately. NOTES Counter-balance device for ASTM D3080 compliance. Not available anywhere else. Also available as a retrofit kit. HM-2560A.1 *Larger compressor may be required if used with additional equipment or larger-sized labs.SOIL MECHANICS www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 125 Direct Shear Computer Control NEXT software and the enhanced Direct Shear module, HM-5700SW, can be used to enhance the operation of the HM-5755 Semi-automated direct-shear machine. This software provides robust machine control, data acquisition and report generation for those using a computer to control consolidation testing operations. How- ever, pneumatic loads are still controlled by the manual valve controls located on the front panel. In addition, operators have the ability to view and control testing operations from a PC in the lab, in the next room or at a different location, while also providing report generating capabilities using the consolidation test-specific software module. So, whether you are controlling a single direct- shear machine, controlling multiple machines, or even a complete geotechnical lab, Humboldt’s NEXT software, in conjunction with Humboldt’s HM-5760 Direct-shear machine, provides a complete solution for the calibration, acquisition, recording and presentation of direct-shear testing data in data tabulation and graphic chart formats. •Machine control, and data acquisition via a networked computer •Provides the ability to use Humboldt’s Next Software’s, advanced test-specific modules •Real-time graphical chart and numerical display of tests via computer display •Effective sampling rate of 320 readings per second • Stores 1000 tests with up to 3000 points per test. • Up to 255 individual tests can be run simultaneously from a single PC • Provides advanced graphing capabilities • Provides full-unit customization • Reports can also be exported to Excel or a CSV file, if desired, and, we can provide custom inte- gration/export solutions for LIMS, EQuIS, gINT, etc. Controller Specifications: Display (Resistive Touch) 7" (178mm) VGA (480 x 800) Real-time test data Graphic and tabulation Processor Dual 32-bit ARM RAM 64MB Memory, non-volatile 4GB Analog to digital converter 24 bit Data acquisition 4 Channels Logging Rate effective rate of 320 readings per second Multi-test storage 1000 Points per test 3000 USB port (front) export data, import/ export calibration data USB port (back) provides external power for wireless access point Ethernet connection for network connectivity 24-bit differential analog to digital converter 4 Ambient temperature sensor 1 Firmware Update flash drive Typical Test Setup for HM-5755 DescriptionPart # Pneumatic Direct Shear with analog inputs (includes a 2,000 lbf (10kN) capacity load cell; 1" (25.4mm) horizontal strain transducer, and a 0.4" (10.2mm) vertical strain transducer) HM-5755.3F NEXT Direct Shear software module HM-5700SW Shear box assembly (specify size) HM-2751.XX(S/D)* Shear box cutter (specify size) HM-2702.XX(S/D)* Dolly/tamper (specify size) HM-2703.XX(S/D)* Additional Items Required PC Computer not supplied Direct Shear/Consolidation Installation Kit HM-4168 Desiccant Dryer, Silica Gel HM-4222 Filter/Regulator HM-4223 *XX Requires a sample size designation, see page 129 for choices and (S/D) refers to square or round sample. HM-4223www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 SOIL MECHANICS 126 Direct Shear Dead-Weight Direct Shear Direct/Residual Shear Apparatus, Analog ASTM: D3080; AASHTO: T236, BS:1377:7 The HM-5750A Direct Shear machine is an eco- nomical choice for performing direct/residual shear tests utilizing the dead-weight method and analog measuring devices. The microprocessor-based sys- tem features a stepper-motor drive system and a 7" touch-screen display that allows the operator to control and monitor all test functions. Like all Elite Series machines, the HM-5750A is built around Humboldt’s integral, multi-channel data logger with touch-screen control, which allows the HM-5750A to be used as a standalone device capa- ble of full test control and data logging. It can also be controlled by a networked computer at any location with access to the network. The carriage accepts shear boxes up to 4.0" (100mm) internal dimen- sion. Forward and reverse measurements permit residual shear testing as standard. A built-in safety feature prevents the overloading of the load mea- suring system. The HM-5750A is supplied complete with a 2,000 lbf (10kN) capacity load cell; 1" (25.4mm) horizon- tal strain transducer, and a 0.4" (10.2mm) vertical strain transducer. Shear box assemblies and related accessories are not included and should be ordered separately. (See page 129) Direct Shear Apparatus, AnalogHM-5750A 3F Shipping wt. 330 lb (149kg) Direct/Residual Shear Apparatus, Digital ASTM: D3080; AASHTO: T236, BS:1377:7 The HM-5750D Direct Shear machine is an eco- nomical choice for performing direct/residual shear tests utilizing the dead-weight method and digital measuring devices. The microprocessor-based sys- tem features a stepper-motor drive system and a 7" touch-screen display that allows the operator to control and monitor all test functions. Like all Elite Series machines, the HM-5750D is built around Humboldt’s integral, multi-channel data logger with touch-screen control, which allows the HM-5750D to be used as a standalone device capa- ble of full test control and data logging. It can also be controlled by a networked computer at any location with access to the network. The carriage accepts shear boxes up to 4.0" (100mm) internal dimen- sion. Forward and reverse measurements permit residual shear testing as standard. A built-in safety feature prevents the overloading of the load mea- suring system. The HM-5750D is supplied complete with a 2,200 lbf (10kN) capacity load ring and two 1.0" x 0.0001" (25.40 x 0.002mm) digital indicators. Shear box assemblies and related accessories are not included and should be ordered separately. (See page 129) Direct Shear Apparatus, DigitalHM-5750D 3F Shipping wt. 330 lb (136kg) Direct/Residual Shear Apparatus, Manual ASTM: D3080; AASHTO: T236, BS:1377:7 The HM-5750 and HM-5750M Direct Shear machines are an economical choice for performing direct/residual shear tests utilizing the dead-weight method with load rings and dial gauges. These models include the carriage, stand, verti- cal load hanger and a balanced lever loading arm with a 10:1 ratio that reduces the weight required to perform tests. The micro-processor-based system features a stepper motor drive system and 7" touch- screen display. The carriage accepts shear boxes up to 4.0" (100mm) internal dimension. Forward and reverse measurements permit residual shear testing as standard. A built-in safety feature prevents the over travel of the load measuring system. The HM-5750 and HM-5750M are supplied com- plete with a 2,000 lbf (10kN) capacity load ring, 1.0" x 0.001" (25.4 x 0.01mm) and 0.5" x 0.0001" (12 x 0.002mm) dial indicator. Shear box assemblies and related accessories are not included and should be ordered separately. (See page 129) Direct Shear Apparatus, ManualHM-5750 3F Direct Shear Apparatus, Manual MetricHM-5750M 3F Shipping wt. 300 lb (149k g) HM-5750.3F The HM-5750 Series of Dead-weight Direct-shear machines, come in three configurations — analog, digital and manual gauge measuring devices. These machines feature Humboldt’s touch-screen monitor for test control. In addition, Models HM-5750A and HM-5750D provide three (3) integral and indepen- dent data acquisition channels, which can be utilized in stand-alone config- urations or accessed through a LAN-networked computer using Humboldt’s Next Software for control and data collection. UPGRADE Counter-balance device for ASTM D3080 compliance. Not available anywhere else. Also available as a retrofit kit. HM-2560A.1 NOTES The machines on this page do not include HM-5700SW Software. HM-5750D.3FHM-5750A.3FSOIL MECHANICS www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 127 Direct Shear Specifications: HM-5750AHM-5750DHM-5750HM-5750M Horizontal movement2" (50mm) Maximum Horizontal shear force2000 lbf (10kN) Vertical load2000 lbf (10kN) Data Channels 330 0 Speed Range0.00001 to 0.49999 in./min. (0.00001 to 12.9999 mm/min.) Data storage 1000 tests and up to 3000 readings per test 1000 tests and up to 3000 readings per test — — Dimensions (L x D x H)40" x 10" x 45" (1016 x 254 x 1143mm) Voltage110/220V 50/60Hz - 6.5amps Dead-Weight Direct Shear Typical Test Setup for HM-5750A DescriptionPart # Dead-weight Direct Shear with analog inputs (includes a 2,000 lbf (10kN) capacity load cell; 1" (25.4mm) horizontal strain transducer, and a 0.4" (10.2mm) vertical strain transducer) HM-5750A.3F NEXT Direct Shear software module HM-5700SW 16 TSF or 50 kg weight set HM-1120 † or HM-1125 † Shear box assembly HM-2751.XX(S/D)* Shear box cutter HM-2702.XX(S/D)* Dolly/tamper HM-2703.XX(S/D)* Typical Test Setup for HM-5750D DescriptionPart # Dead-weight Direct Shear with digital inputs (a 2,200 lbf (10kN) capacity load ring and two 1.0" x 0.0001" (25.40 x 0.002mm) digital indicators) HM-5750D.3F NEXT Direct Shear software module HM-5700SW 16 TSF or 50 kg weight set HM-1120 † or HM-1125 † Shear box assembly HM-2751.XX(S/D)* Shear box cutter HM-2702.XX(S/D)* Dolly/tamper HM-2703.XX(S/D)* Typical Test Setup for HM-5750 & HM-5750M DescriptionPart # Dead-weight Direct Shear with load ring (a 2,200 lbf (10kN) capacity load ring, 1.0" x 0.001" (25.4 x 0.01mm) and 0.5" x 0.0001" (12 x 0.002mm) dial indicator HM-5750.3F or HM-5750M.3F 16 TSF or 50 kg weight set HM-1120 † or HM-1125 † Shear box assembly HM-2751.XX(S/D)* Shear box cutter HM-2702.XX(S/D)* Dolly/tamper HM-2703.XX(S/D)* †More weight choices can be found on page 128. * XX Requires a sample size designation, see page 129 for choices and (S/D) refers to square or round sample.Next >