< Previouswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 318 ASPHALT Road Quality—Drill Bits, Core Removal Z-Edge for concrete HR-2554 Core Drill Accessories ExitPoint Through-hole Drill Guide Accurately detect exit points before drilling and coring with the ExitPoint through-hole drill guide. The HR-2599 is the easiest and fastest way to locate a precise spot, without measuring, before you start your project. Scans through most types of non-magnetic building materials, such as wood, drywall, gypsum panels, bricks, and poured concrete up, to 11.81 in. (300 mm) thick. This simple, yet effective, tool saves time and money by reducing guesswork, rework, unnec- essary holes, and costly broken drill bits. Ideal for cable and wire installations, concrete scanning, and anytime through-hole drilling is required. ExitPoint Through-hole Drill GuideHR-2599 Ship wt. 1.4lbs. (0.64kg) Diamond Drill Bits These professional-quality, diamond, drill bits are designed for use in drilling asphalt and con- crete. They have a total segment height of .320" (8.128mm), a diamond depth of .250" (6.350mm) and a segment base of .070 (1.778mm). The stan- dard bit length is 13" (330.200mm) and the inte- gral thread adapter is 1.25"– 7 thread. Concrete drill bits are for critically hard concrete with heavy, steel reinforcement. Asphalt drill bits are for asphalt and concrete with soft, abrasive aggregate. Diamond Drill Bits, High-Performance, Small These professional-quality, diamond drill bits are designed for drilling cured concrete with medium to soft aggregate with or without steel reinforce- ment. They have a total segment height of .400" (10.160mm) (.300" (7.620mm) diamond depth and .100 (2.54mm) segment base. The standard bit length is 13" (330.200mm) and the integral thread adapter is 1.25"– 7 thread. CoreSnap Removal Tool The CoreSnap allows you to remove a drilled sample from a roadbed at or below the tackline without prying or drilling completely through the old roadbed. The CoreSnap is placed down over a normally cut core and tighten the binding bolt with a 0.25" drive socket/ratchet. A quick lateral motion of the handle breaks the core sample away from the older mat beneath, allowing the core to be removed easily. CoreSnap Removal Tool, 4"HR-2554 CoreSnap Removal Tool, 6"HR-2556 Ship wt. 10.4lbs. (4.7kg) DescriptionModel Extension rod, 9" (229mm); for drill- ing holes deeper than 12" (305mm) HR-2510 Strap wrench, 18" (457mm) allows bit removal from drill spindle with- out damage to bit barrel HR-2514 Angle drilling attachment for HR-2500A. Tilts column to allow drilling from 90° to 45° angle from surface HR-2515 Portable water pressure tank. Hand-operated. 4 gallon (15 liter), delivers water under pressure when water supply is not available. HR-2516 Water trapping assembly, confines wastewater on surface and electric pump moves water into container HR-2511 Diamond bit edge dresserHR-2512 Replacement wheel for diamond bit edge dresser (HR-2512) HR-2513 HR-2514 HR-2512 HR-2516 HR-2599 Size AsphaltConcrete In. mm 125HR-2550.1HR-2530.1 1.12529HR-2550.1125HR-2530.1125 1.2532HR-2550.125HR-2530.125 1.538HR-2550.15HR-2530.15 1.7544HR-2550.175HR-2530.175 1.87563HR-2550.1875HR-2530.1875 251HR-2550.2HR-2530.2 2.2557HR-2550.225HR-2530.225 2.563HR-2550.25HR-2530.25 2.7570HR-2550.275HR-2530.275 376HR-2550.3HR-2530.3 3.589HR-2550.35HR-2530.35 4100HR-2550.4HR-2530.4 4.25108HR-2550.425HR-2530.425 4.5114HR-2550.45HR-2530.45 5127HR-2550.5HR-2530.5 5.5140HR-2550.55HR-2530.55 6152HR-2550.6HR-2530.6 6.25159HR-2550.625HR-2530.625 7178-HR-2530.7 8203HR-2550.8HR-2530.8 9230HR-2550.9HR-2530.9 10254HR-2550.10HR-2530.10 11280HR-2550.11HR-2530.11 12305HR-2550.12HR-2530.12 13330HR-2550.13HR-2530.13 14350HR-2550.14HR-2530.14 HR-2530.4 Size Medium*** Inchesmm 1/213 HR-2570.5 5/817 HR-2570.625 3/419 HR-2570.75 7/822 HR-2570.875 128 HR-2570.1 Be advised that core drill bits have .125" walls and produce a core 0 .25" smaller than the OD of the drill bit . NOTESwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 319Dynamic Testing— Universal Specifications Actuator Stroke 6" (150mm) Monotonic testing Yes Waveform types Sinusoidal, haversine, square, user defined* Max test frequency(Hz) 100 Cross head adjustment Not required in normal use Max static load (14.341kN) Max dynamic load 24.020kN Energy efficient Yes Electrical Supply 110/220V 50/60Hz, 1 Ph Noise(db) 65 Dimensions 14.2" x 15.7" x 29" (360 x 400 x 740mm) Working Space Required (WxDxH) 32.5" x 65" x 83" (825 x 1650 x 2100mm) Desktop PC Included Installation Verification and on-site Training are available, please inquire . INSTALLATION Electromechanical UTM Versa Pro ASTM D4123, D7369, D7460, D8237, D8044, D7313, WK26816T; AASHTO TP31, T307, T322/ TP9, T342/TP62, T321, T378 / TP79, TP105, TP124 Method B, TP124 Method A, TP107 (S-VECD); EN 12697-24 Annex A and E, 12697- 26 Annex A, C, and E, 12697-25 Method A and B, 12697-26 Annex B, C, D, and E,12697-24 Annex D, 12697-44, 12697-26 Annex D Until now Universal Test Machines for asphalt mix and unbound materials could be divided into three types – pneumatic, hydraulic, and modified AMPTs. The Electromechanical UTM Versa Pro, powered by eMotion Technology and controlled by the industry-leading cDAC data acquisition and control system, supported by dedicated DIMEN- SION asphalt testing software combines the best features of the three other machine types to cre- ate the perfect solution for testing laboratories. With the UTM VersaPro, you can easily and accurately perform both research level and standard asphalt mixture and unbound material tests at affordable prices and in an eco-friendly environment. Main Features: •Electromechanical actuator EMT1 with 150mm stroke replaces pneumatic or hydraulic load- ing actuator ensures minimal subframe and specimen movement, more stable set up, better secured LVDTs and other transducers •Test frequency range from static to 100Hz •Compatible with our standard temperature- controlled cabinet with temperature range –25°C to +70° [1] •Easily interchangeable LVDTs and other trans- ducers with uniform plug & play connections •Standard and bespoke testing procedures – static, dynamic, compressive, tensile •Ambient temperature-dependent. Testing temperature is subject to actuator and test fixtures’ temperature range limitations. Main Applications: •Superpave+ Performance Testing •Asphalt mix design •Quality Control •Recycled Materials Studies •Additive performance evaluation Key Benefits: •With an industry first 150mm stroke actuator you can perform variety of tests without cross- head adjustment. This is the perfect platform to be used with your existing test fixtures and temperature control. •Hydraulic performance for pneumatic price •Plug & play adaptable and expandable system •Easily interchangeable cutting edge TEDs technology enables transducers to be swapped between channels and even cDAC boxes, as the calibration stays with the transducer. Connect any load cell, LVDT, extensometer, strain gauge or other types of transducer to cDAC. Record crack progression with software triggered photos for digital image analysis. Includes: •Desktop PC •cDAC •DIMENSION software Electromechanical UTM Versa Pro 15.5kN Machine, Standard, 120/220V 50/60Hz HA-5100.3F Ship wt. 492lbs. (223kg) HA-5100.3Fwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 320 ASPHALT Dynamic Testing— Universal StandardAccessory DescriptionModelUTM-15.5kNUTM-25kNUTM-100kN NCHRP 9-19 AASHTO TP62 Test system to perform dynamic modulus according to AASHTO TP62, SPT flow number (NCHRP 9-19), SPT flow time (NCHRP 9-19) HA-5123.1√˜√˜ √˜ AASHTO T307 Triaxial system to perform AASHTO T307 for 200x100m- mØ specimens of unbound materials HA-5123.2√˜√˜ √˜ Triaxial system to perform AASHTO T307 for 200x100m- mØ and 150x300mmØ specimens of unbound materials. To use with CRT-UTM-NU pillar extensions are required.* HA-5123.3√˜√˜ √˜ *Larger Pillars for UTM-NU (for T307+)HA-5100.2√˜ x Additional parts to upgrade from T307 to T307+HA-5123.5√˜√˜ √˜ AASHTO T322 Indirect Tensile Creep measurement system according to AASHTO T322 HA-5123.6 √˜√˜ √˜ AASHTO TP 124 AASHTO TP 105 ASTM D8044 Semi circular bending system to perform ASTM D8044, AASHTO TP 124 and TP 105 test HA-5123.7√˜√˜ √˜ ASTM D7369Resilient modulus test system to perform ASTM D7369HA-5123.8√˜√˜ √˜ EN 12697-26 (Annex E) Direct Compression & Tension Measurement System to perform test according to EN 12697-26 Annex E for CRT- UTM-NU HA-5100.3√˜x x Direct Compression & Tension Measurement System to perform test according to EN 12697-26 Annex E for CRT- UTM-HYD HA-5123.10x√˜ √˜ EN 12697-26 (Annex C) EN 12697-24 (Annex E) Indirect tensile fatigue measurement system to perform EN 12697-24 (Annex E) for 100mmØ specimens. To be used with CRT-ITSM-SET. HA-5123.11√˜√˜ √˜ Indirect tensile fatigue measurement system to perform EN 12697-24 (Annex E) with 100 & 150mmØ specimens. To be used with CRT-ITSM-SET. HA-5123.12√˜√˜ √˜ Indirect tensile stiffness modulus and fatigue measurement system to perform EN 12697-26 (Annex C) Ø100 & 150mm and EN 12697-24 (Annex E) Ø100mm specimens. HA-5123.13√˜√˜ √˜ Indirect tensile stiffness modulus measurement system to perform EN 12697-26 (Annex C) Ø100&150mm speci- mens. HA-5123.14√˜√˜ √˜ Add-on for CRT-FAT-SET for 150mmØ specimens. To be used with CRT-ITSM-SET and CRT-FAT-SET. HA-5123.15√˜√˜ √˜ EN12697-25 (Method A & B) Dynamic and static creep measurement system to perform EN12697-25 (Method A) HA-5123.16√˜√˜ √˜ Dynamic and static creep measurement system - confining stress to perform test according to EN 12697-25 Method B. HA-5123.17√˜√˜ √˜ IAN 73/06 – Design Guidance for Road Pavement Foundations PUMA - Precision Unbound Materials Analyzer for 150mmØ specimens HA-5123.18√˜√˜ √˜ Temperature Controlled CabinetHA-5100.1√˜x √˜ Accessory Fixtures for Universal Testing Machineswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 321Dynamic Testing— Universal cDAC TM Controller and Data Acquisition The cDAC™ digital data acquisition and control unit coupled with DIMENSION TM software, gives you the power to perform the most demand- ing of tests with our Universal, Dynamic Testing Machines. Both are designed with the ease-of-use and reliability required for standard testing and the flexibility and advanced capabilities required for research. DIMENSION TM Software Features: •Profile builder gives ultimate flexibility to design and store custom testing routines •Standard test library for quick and reliable testing to ASTM, AASHTO and CEN Standards •Transducer database to store and manage your sensors •Configurable waveform and summary data capture allows total control over the information gathered during a test •Multi-lingual test screen shows a graphical view of all connected transducers and calculated values in real time •Test data available in Excel TM compatible format for user analysis cDAC TM Hardware Features: Provides a configurable design to meet your needs with up to 7 modules (max. 4 of each type) from the following per cDAC unit: Interface, Acqui- sition, Digital and Servo. Interface Module: •100Mbit/s Ethernet TCP/IP and UDP con- nection to PC provides for fast and robust communications •RS232/422/485 serial port for connection to environmental chambers and other ancillary equipment • USB port for direct data logging •Atmel AT91SAM Smart ARM-based Micro- controller for high performance Servo Module • Dual 5kHz control loops per module •0.01 to 100Hz cycle frequency to meet all your testing needs •Digital on-the-y adjustment of all PID parameters •Multichannel selectable feedback from any sen- sor (or sum of or difference between sensors) on any acquisition card • Hardware function generator • Bumpless transfer between control methods •Texas instruments TMS320DSP digital signal processor •16-bit Analog Voltage (±10V and (0 to 10V) and Current (±40mA, (0 to 20)mA, and (4 to 20mA)control output for servo valve or other control device Digital Module •4 x 24V opto-isolated digital inputs with 100mA sink capacity (each can be configured as counters) •4 x 24V opto-isolated digital outputs to drive auxiliary hydraulic/pneumatic solenoid valves with 1.6A drive capacity per channel (each can be configured as a PWM source) •NXP LPC2148 ARM7TDMI-S based high-per- formance 32-bit RISC micro-controller Acquisition Module •Any combination of up to 8 sensors per module (load cells, LVDTs, RTDs, strain gauge bridges, pressure transducers, and many more) •TEDS (Transducer Electronic Data sheet) sensors for plug and play measurement •Synchronous acquisition of all sensor measure- ments from all modules to eliminate data-skew • Multiple segment 5th order polynomial linear- izion of sensors for supreme accuracy • 24-bit resolution on all channels • 5kHz acquisition rate per channel •Anti-alias filters to prevent high-frequency interference •Auto-ranging ampliers with the following gain steps: 1/8, 1/4, 1/2, 1, 2, 4, 8, 16, 32, 64, 128 •(0 to 10)V, 24V, and (0 to 20)mA power supplies for sensors cDAC Data Controller, 120/220V 50/60HzHA-5105.3F Shipping wt. 13lbs (6kg) HA-5105.3Fwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 322 ASPHALT Dynamic Testing— Four-Point Bending Large Hydraulic, Four-Point Bending Beam Machine ASTM D7460, AASHTO T321, EN 12697-24 Annex D, EN 12697-26 Annex B The Large Hydraulic Four Point Bending Beam Machine uses advanced servo-hydraulic tech- nology and a high-speed digital data acquisition and control system together with user-friendly software During testing both graphical and tab- ular data are displayed on screen and test data is stored to disc in Microsoft ® Excel ® compatible format. The test frame is housed in a Tempera- ture Controlled Cabinet with fan-assisted air circulation and a temperature range of -20 to 30°C. The unique constant torque clamping, and three-transducer deflection measurement system of the Large Hydraulic Four-Point Bending Beam Machine can be configured to accept different beam sizes. This means that the ratio between beam dimensions and maximum aggregate size of test specimens will satisfy the requirements of the relevant European specifications and will accept aggregates with diameters greater than 32mm diameter. Features: •Frequency range 0.1 to 60Hz •High-quality, Servo-Hydraulic Four-Point Bending Machine •Double-acting, fatigue-rated hydraulic actuator with integral stroke transducer •Star servo valve with “Sapphire Technology” •Can be used with simple one or research level three LVDT transducers •Accepts various beam sizes: 380 to 660mm in length and 50 x 50mm and 100 x 100mm cross sections •Temperature Controlled Cabinet range -20 to 30°C •Sinusoidal controlled strain or controlled stress fatigue test modes •Constant torque motorized specimen clamp- ing to eliminate errors due to localized beam indentation •Self-contained loading system •User friendly software for determination of fatigue resistance and stiffness modulus •Capable of performing healing, modulus, fatigue multi-stage testing and camera triggering •Supplied with traceable calibration certificate Software: •User friendly, intuitive and reliable Windows ® software developed using LabVIEW™ •Specifically written to meet AASHTO and ASTM standards •The user interface can be translated into the user’s preferred language – please inquire •Stored test data can be analyzed and com- pared with other test data utilizing a spread- sheet package •Utilities are included for curve fitting of acquired data; testing of system’s inputs and outputs; phase correction and a transducer database for storing calibration factors Large, 4-Point Machine, 415V 50Hz, 3PH HA-5500.7F.3 Ship wt. 1435 lbs. (650kg) Specifications Force Transducer 2250lbf (10kN) Specimen Transducer Range ±0.09" (3 x ±2.5mm) Actuator Stroke 0.4" (10mm) Frequency 0.1 to 60 Hz Electrical Supply 415V 50Hz, 3 Ph Compressed Air 7-10 bar (100-145psi) @ 3.5cfm (100lpm) Test Frame Dimensions 41.5" x 43" x 83" (1050 x 1100 x 2100mm) Working Space Required (WxDxH) 81" x 83" x 90.5" (2050 x 2100 x 2300mm) Desktop PC Included AccessoriesModel Dummy PVC beam 2" x 2" x 15" (50 x 50 x 380 mm) HA-5400.1 Dummy PVC beam 4" x 4" x 26" (100 x 100 x 660 mm) HA-5500.2 HA-5500.7F.3 Accessories are not included and should be ordered separately. Installation Verification and on-site Training are available for the Large Hydraulic, Four-Point Bending Beam Machine, please inquire . INSTALLATIONwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 323Dynamic Testing— Four-Point Bending Stand-Alone, Four-Point Bending Beam Machine ASTM D7460, AASHTO T321, EN 12697-24 Annex D, EN 12697-26 Annex B The Stand Alone Four Point Bending Beam Machine uses advanced servo pneumatic tech- nology and a high-speed digital data acquisition and control system together with user-friendly software. During testing both graphical and tab- ular data are displayed on screen and test data is stored to disc in Microsoft ® Excel ® compatible format. The clamps are at 118.5mm (4.67") cen- ters (the distance between the outer clamp is 335.6mm (14") according to AASHTO specifica- tions, but the height and width of the beam can be varied). Features: •Frequency range 0.1 to 30Hz¹ •Low cost pneumatic standalone four point bending machine •Low-friction actuator and high-performance ceramic spool servo-valve •On-specimen measurement system removes errors due to frame flexure •Designed for AASHTO beam sizes •Sinusoidal controlled strain or controlled stress fatigue test modes •Constant torque motorized specimen clamp- ing to eliminate errors due to localized beam indentation •Self-contained loading system •User friendly software for determination of fatigue resistance and stiffness modulus •Capable of performing healing, modulus, fatigue multi-stage testing and camera triggering Software: •User friendly, intuitive and reliable Windows ® software developed using LabVIEW™ •Specifically written to meet AASHTO and ASTM standards •The user interface can be translated into the user’s preferred language – please inquire •Stored test data can be analyzed and com- pared with other test data utilizing Excel ® •Utilities are included for curve fitting of acquired data; testing of system’s inputs and outputs; phase correction and a transducer database for storing calibration factors Stand-alone, 4-Pt. Machine, 110/220V 50/60HzHA-5400.3F Ship wt. 79 lbs. (36kg) Specifications Force Transducer 2248lbf (10kN) Specimen Transducer Range ± 0.04" (1mm) Actuator Stroke 0.4" (10mm) Frequency 0.1 to 30 Hz Electrical Supply 110/220V 50/60Hz, 1 Ph Compressed Air 7-10 bar (100-145psi @ 21cfm (600 lpm) Test Frame Dimensions 18" x 7.5" x 22.5" (440 x 190 x 570mm) Data Acquisition Enclosure 15" x 11" x 5.5" (360 x 280 x 140mm) Working Space Required (WxDxH) 32.5" x 65" x 83" (826 x 1650 x 2100mm) Desktop PC Included HA-5400.3F Installation Verification and on-site Training are available for the Stand-Alone, Four-Point Bending Beam Machine please inquire . INSTALLATION AccessoriesModel Dummy PVC beam 2" x 2" x 15" (50 x 50 x 380 mm) HA-5400.1 Cabinet, temperature-controlled HA-5400.3LABORATORY Bags, Sample 374 Beakers 364, 368 Boxes 369 Brushes 373 Calipers 375 Chisels 372 Crucibles 368 Desiccator 369 Dishes 368-369 Dispensers 365 Duometers 374 Flasks 365 Gauges 376 Gloves 374 Graduated Cylinders & Beakers 364 Hammers 372 Hot Plates 362-363 Indicators 376 Jars 369 Ovens 356-361 Bench Ovens 358-361 Lab Ovens 356-357 Mortar & Pestle 375 Muffle & Box Furnaces 362 Pans & Bowls 367 Rain Gauge 375 Scales & Balances 337-355 Balance Calibration Weights 355 Bench Scales 350-352 Comparison Chart 337-339 Field Scales 349 Hanging Scales 353 High Capacity 348-349 Mechanical Balances 353-354 Portable Balances 345-347 Precision Balances 340-344 Scoops 370 Scoops & Pans 366 Shovels 374 Spatulas 371 Straight Edge 373 Transformers 371 Thermometers 326-336 ASTM Mercury 335 Digital 326-328, 331-332 Digital IR 329 Mercury-Free 334 Probes 330 Stem 332-333 Timers 336 Trowels 371www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 LABORATORY 326 Thermometers, Digital ModelHT-4795HT-4796 & HT-4796-2HT-4797HT-4798 Type Pt100 Platinum Precision, hand- held calibration thermometer Pt100 Platinum Precision, hand-held thermometer Dual Channel– Thermocouple High-Precision Digital Thermometer Single Channel– Thermocouple High-Precision Digital Thermometer Features High Precision Accuracy, 2-channel measurement, Max /Min , USB Interface, Data Logger function for up to 6000 measurements USB interface; High measuring accuracy; Integrated calibration function for simple compensation of sensor tolerances; Measuring channels are freely assignable; Recording maximum, minimum, hold and average values; Integrated sensor holder for one hand operation Probeorder probes separatelyorder probes separatelyorder probes separatelyorder probes separately Range -328° to 1562°F -200° to +850°C -328° to 1562°F -200° to +850°C -200°C to +1760°C-200°C to +1760°C Resolution 0 001°C from -200°C to +200°C remaining range 0 01°C 0 01°C from -200°C to +200°C remaining range 0 1°C 0 1°C & °F0 1°C & °F Accuracy (Type K) ±0 015°C from -50°C to +199 99°C ±0 025% of reading for the remaining range ±0 03°C from -50°C to +199 99°C ±0 05% from -200°C to +200°C otherwise 0 05% of reading ±0 2°C from -40°C to +200°C ±0 5°C from +201°C to +1000°C otherwise 1 0°C ±0 2°C from -40°C to +200°C ±0 5°C from +201°C to +1000°C otherwise 1 0°C Power9v battery Traceable Certificate NIST Traceable Certificate available, please inquire. Dual-Channel Shown with Probe, not included HT-4795 Thermometer, High-Precision, Calibration The HT-4795 precision hand-held thermometer is a 2-channel instrument that has a resolution of 0 001°C with a system accuracy of ± 0 015K It provides an excellent calibration reference for your other thermometers or operations requiring highly accurate readings Simultaneous display of two measured values or differential Records minimum, maximum, hold and average values Integrated calibration function (according to EN60751 up to 14 points) Password-protected calibration function Optional DE-Graph Windows Software for graphic and tabular documentation Thermocouple probe not included Thermometer, High-PrecisionHT-4795 Thermometer, High-Precision, 3 Pt. Cal. HT-4795C Ship wt 1 3lbs (0 6kg) Thermometer, Precision, Calibration The HT-4796 and HT-4796-2 Hand-held Ther- mometers are high-precision, metrology-grade, NIST-traceable instruments These high-accu- racy thermometers are used when tempera- ture measurement is critical and/or when online documentation is required The HT-4796 and HT-4796-2 can also be used as a NIST Stan- dard to verify and calibrate routinely used instru- ments Optional Smartgraph Windows Software for graphic and tabular documentation Features include: High-accuracy; USB interface; Records maximum, minimum, hold and average values, Measuring channels are freely assignable and integrated sensor holder for one hand operation Thermocouple probe not included Thermometer, Precision, 1-channelHT-4796 Thermometer, Precision, 1 Ch.- 3 Pt. Cal.HT-4796C Thermometer, Precision, 2-channelsHT-4796-2 Thermometer, Precision, 2 Ch.- 3 Pt. Cal.HT-4796-2C Ship wt 2lbs (0 9kg) Thermometer, Precision The HT-4797 and HT-4798 Digital Thermocou- ple Thermometers are an economically-priced solution for precision measurements of a wide range of temperature measuring needs By using thermocouple types J, K, L, N, T a range of -200°C to +1370°C (-328°F to 2498°F) can be obtained These instruments can be used in a wide variety of applications Features include: USB interface; High measuring accuracy; Inte- grated calibration function for simple compen- sation of sensor tolerances; Measuring chan- nels are freely assignable, Recording maximum, minimum, hold and average values and Inte- grated sensor holder for one hand operation Thermocouple probe not included Thermometer, Precision, 1-channelHT-4797 Thermometer, Precision, 3 Pt. Cal. HT-4797C Thermometer, Precision, 2-channelsHT-4798 Thermometer, Precision, 3 Pt. Cal.HT-4798C Ship wt 2lbs (0 9kg) Single or Dual-Channel Shown with Probe, not included HT-4796, HT-4796-2 RangeLength x Dia.Model -200 to +450°C & F230 x 3mmHT-4795 1 -200 to +450°C & F300 x 3mmHT-4795 2 -200 to +450°C & F150 x 3mmHT-4795 3 Smartgraph Windows SoftwareHT-4795SW USB Data CableHT-4795UB Probes and Software for HT-4795, HT-4796 and HT-4796-2 Probes for HT-4797 and HT-4798 RangeLength x Dia.Model Probe Adapter for K – Mini ConnectorHT-4797 4 K-Thermocouple Steel braided -40/480°C6000mmHT-4797 1 K- Immersion Probe -100 to +1100°C &F300 x 3mmHT-4797 2 HT-4798 Dual-Channel Shown with Probe, Adapter, not included HT-4797 Single-Channel Shown with Probe, Adapter, not includedwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 LABORATORY 327Thermometers, Digital Thermometer, Pt100 Platinum, Digital The HT-4510 & HT-4511 Single and Dual-Probe Precision RTD Digital Thermometers can be used as a Laboratory Temperature Standard, for the verification and calibration of liquid-in-glass, digi- tal and dial bi-metal thermometers They can also be used to calibrate laboratory instruments such as freezers, refrigerators, incubators, ovens, etc These precision Pt100 platinum thermometers meet EN 60751 standards and are traceable to NIST Standards, being furnished with a certifi- cate of accuracy The HT-4510 and HT-4511 are loaded with the features requested by most lab- oratories Both models include Pt 100 Insertion probes Battery life is approximately 100 hours Thermometer, Single, Pt100 PlatinumHT-4510 Thermometer, Dual, Pt100 PlatinumHT-4511 Ship wt 2lbs (0 9kg) Thermometer, “Supra” Precision Pt100 Platinum The HT-4505 & HT-4506 are very accurate tem- perature measuring systems With the accuracy of 0 1 °C and resolution of 0 01°C, these thermom- eters will fulfill the most critical measuring require- ments in your lab Both units include a Platinum temperature-measurement resistor (Pt 100/4-line type) 9" probe with 5" handle and 24" cable Both units also provide a dual-display; data-hold func- tion; max/min function; auto-lock connector and a large backlight LCD display The standard HT-4505 model includes: a Preci- sion Pt-100 Probe, 9V Battery, Instruction Manual and Carry Case The HT-4506 data logger model includes these same items, plus Windows soft- ware and a USB cable Thermometer, Standard, Pt100 PlatinumHT-4505 Thermometer, Data Logger, Pt100 PlatinumHT-4506 Ship wt 2lbs (0 9kg) Thermometer, Total Range, Traceable One of the fastest reading and technically advanced thermometers available Unit is con- structed for rugged applications and provides the use of all type-K probes It also provides min/max capabilities, a 24-hour timer, alarms and a mem- ory function Includes HT-4028 fast probe Thermometer, Total Range, TraceableHT-4015 Ship wt 1 3lbs (0 6kg) Thermometer, Type-K Precision Thermocouple Handy, Robust temperature instrument with K-Type thermocouple inputs Min/Max and Hold function Stores 20 Measurements in Memo- ry 1-point CAL function and USB interface AA battery with 160hr, life Single and Dual-thermo- couple models Order probes separately Thermometer, Type K, Precision, SingleHT-4500 Thermometer, Type K, Precision, DoubleHT-4501 Ship wt 1 3lbs (0 6kg) HT-4015 HT-4510 HT-4511 ModelHT-4510 & HT-4511HT-4505 & HT-4506HT-4015HT-4500 & HT-4501 Type Pt100 Platinum Precision, hand- held calibration thermometer Pt100 RTD Platinum Precision, hand-held thermometer Single Channel– Thermocouple High-Precision Digital Thermometer Dual Channel– Thermocouple High-Precision Digital Thermometer Features High Precision Accuracy, 1 or 2-channel models, Max /Min /Avg , temp hold func- tion, Data Logger function for up to 6000 measurements HT-4505 — w/memory HT-4506 — w/data logger Auto-lock connector, Max /Min dual-display, data hold, power off Memories, alarms, timer and min/ max capabilities, backlit display, protective casing with flip-out Stand, °F and °C switchable, 0 625" high digits, hold button MAX, MIN, HOLD, AVG functions 1-point-CAL-function USB Interface Memory: 20 Measurements Single and Dual Probe Models Probeincludes Pt100 Insertion probeincludes precision Pt100 probe 4', fast-response beaded probe (HT-4028) uses all type K probes order probes separately Range-100°C to 300°C -148 to 752°F (-100 to 400°C) -328 to 2498°F -200 to 1370°C -200°C to 1370°C Resolution0 1°C, 0 1°F 0 02°F, (0 01°C)0 1°/1° 0 1°C from -99 9°C to 399 9°C, otherwise 1°C Accuracy (Type K) ±0 4°C (instrument only) ±0 05% reading + 02°F (±0 05% reading + 01°C) ±1°C from -50° to 740°C (-328 to 1364°F) otherwise ±2°C ±0 5°C (instrument only) Power(3) AAA batteries9v battery(3) AAA batteries(2) AA batteries Traceable Certificate Yes, included NIST Traceable Certificate available, please inquire Yes, included NIST Traceable Certificate available, please inquire DescriptionModel Pt100 Probe HT-4510 1 DescriptionModel Pt100 Insertion Probe HT-4505 1 Pt100 Immersion Probe HT-4505 2 RS-232 Cable HT-4505 3 AC Adapter HT-4505 4 Accessories for HT-4505 and HT-4506 DescriptionModel K-Therm Steel braided, -40/250°C HT-4500 1 Carry/Storage Case HT-4500 3 DE-Graph Windows Software HT-4500 4 Accessories for HT-4500 and HT-4501 Probe for HT-4510 and HT-4511 HT-4505 HT-4506 HT-4500 HT-4501Next >