< Previouswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 248 CEMENT Blaine Apparatus Blaine Air Permeability Apparatus ASTM C204; AASHTO T153 The Blaine Air Permeability Apparatus determines the fineness of Portland cement in terms of spe- cific surface area expressed as the total surface area in square centimeters per gram of mortar or cement. The Blaine works by drawing a definite quantity of air through of bed of cement exhibiting a definitive porosity value. The number and size of the pores in a prepared bed of definite porosity is a function of the size of the particles and determines the rate of airflow through the bed. This proce- dure is outlined in ASTM C204, Method A and AASHTO T153. The Humboldt Blaine Air Perme- ability Apparatus consists of: calibrated U-tube manometer, ground glass joint, stainless steel test cell and plunger, rubber aspirator bulb and perfo- rated disc. Includes an 8 oz. (226.8g) bottle of red manometer fluid, filter paper, wood block for hold- ing test cell during filling and a funnel. Mounted on finished wood panel with rubber-footed base. To perform this test, NIST Portland Cement #114R is required by the ASTM standard for calibration. See Accessories H-3817 and H-3817.20. Blaine Air Permeability ApparatusH-3810 Ship wt. 7lbs. (3.1kg) Portland Cement Fineness Standard, SRM 114R This Standard Reference Material (SRM) is used in calibrating fineness testing equipment according to ASTM Standard Methods. The SRM unit con- sists of a glass vial with plastic caps containing powdered cement (each vial is contained in a sealed foil bag). Each vial contains approximately 5g of cement. SRM 114R 1 vialH-3817 SRM 114R, package of 20H-3817.20 Ship wt. 0.5lbs. (0.2kg) Blaine Apparatus, Semi-Automatic ASTM C204; AASHTO T153, EN 196; BS 4550 Determines fineness of cement in terms of specific surface expressed as total surface area square centimeters per gram. To obtain the most accu- rate results, the test should be performed in a tem- perature-controlled environment. The Semi-auto- matic Blaine Apparatus provides more accuracy and precision than provided by the manual Blaine Apparatus. The device uses an automatic pump and timer to evaluate the time precisely. Calibra- tion of this unit is done by using various reference sands. To obtain the most accurate results, the test should be performed in a temperature con- trolled environment. Unit includes: the unit with an electric pump and timer; measuring cell, filter papers (12.8mm, 1000pk.; fill oil (50ml); plug; ther- mometer; brush and funnel. Blaine Apparatus, Semi-AutomaticH-3056.3F Ship wt. 15lbs. (6.8kg) H-3056.3F H-3810 Accessories & Replacement Parts DescriptionModel Rubber bulbH-3811 Cell and plungerH-3812 Cell and plunger, CalibratedH-3812CAL Perforated brass discH-3813B Perforated stainless steel discH-3813S Manometer fluid, 8oz (240ml)H-3814 Manometer u-tube, calibratedH-3815 Filter paper discs, medium retentive, 1.27cm, pkg 1000 H-3816.1M DescriptionModel Calibration Sand, Coarse, 125gH-3056.2 Calibration Sand, Fine, 125gH-3056.4 Fill Oil, 150mlH-3056.5 Light GreaseH-3056.10 U-shaped TubeH-3056.6 Filter Papers, 12.8mm (1000)H-3056.1 Measuring Cell, 1.8cm 3 H-3056.11 Perforated DiscH-3056.8 TamperH-3056.13 H-3056.3F Accessories & Replacement Parts H-3810 H-3812 H-3814 H-3813B H-3817 H-3817.20 H-3816.1M H-3811 H-3056.1 H-3056.2 H-3056.4 H-3056.11 3F part numbers are 120/220V 50/60Hz NOTESwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CEMENT 249Blaine Dyckerhoff Electronic Blaine Apparatus, Dyckerhoff The Electronic Blaine Apparatus, Dyckerhoff system is a semi-automatic device with pump and time registration for the rapid determina- tion of specimen characteristics. This device is a semi-automatic cement air permeability tester used for the determination of the specific sur- face or Blaine value. Once the test material is set inside the chambers, the test procedure is able to measure the time for the user. Measuring cell dia. is 41 mm (1.6"). Volume of measuring cell is 73 cm3. Unit includes apparatus, measuring cell, filter papers ø41mm 500pk, fill oil 150ml, tamper and dust filter ø13mm. Electronic Blaine Apparatus, DyckerhoffH-3058.3F Ship wt. 47lbs. (21.3kg) PC-Controlled Blaine Apparatus, Dyckerhoff The PC-controlled, electronic Blaine Apparatus, Dyckerhoff system provides an automatic test pro- cedure and evaluation, complete with software, for one cell. Once the test material is set inside the chamber, the test procedure is able to measure the values for the user. This device provides quick test preparation, which does not require the oper- ator to determine the weighed quantity, as precise as he would for the standard procedure. After test preparation, the device can perform the test auto- matically and the software records all informa- tion without need of supervision. Apparatus and software are able to measure the final result for the user. Measuring cell dia. is 41 mm (1.6"). Vol- ume of measuring cell is approximately ca. 73cm 3 . Comes complete with apparatus, measuring cell, filter papers ø41mm 500pk, fill oil 150ml, tamper and dust filter ø13mm, software. Does not include required PC. PC-Controlled Apparatus, DyckerhoffH-3059.3F Ship wt. 47lbs. (21.3kg) H-3059.3F H-3058.3F H-3058, H-3059 Accessories & Replacement DescriptionModel Reference Sand, Coarse, 600gH-3058.7 Reference Sand, Fine, 600gH-3058.8 Fill Oil, 150mlH-3056.5 U-Shaped TubeH-3056.6 Filter Papers, 41mm (500)H-3058.1 Foam Plugs, Dust Filters (10)H-3058.5 Precision Digital GaugeH-3059.6 O-Ring for Measuring CellH-3058.2 Perforated Disk, ø40 x 1.5mmH-3058.4 H-3058.1 H-3058.5 H-3056.5H-3056.5www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 250 CEMENT Vicat Testing DescriptionModel Needle 1.13mm dia., EN 196-3 H-3052.2 Needle 1mm dia., ASTM C191 H-3052.9 Weight, 700g H-3052.45 Mold tank, in-water testing H-3052.3 Printer paper (10 rolls) H-3052.6 H-3052A.3F Accessories, Spare Parts Vicat Machine, Automatic ASTM C187, C191; AASHTO T131; EN 196-3; DIN 1164, DIN 1168 gypsum; NF P15/431 and BS 4550 The new Vicatronic apparatus is designed and manufactured using the most recent and sophisti- cated technology to grant precise measurements of the setting time of cements, mortars, gypsum and other pastes. Features: • Real-time graphic display of the test. • Fully automatic execution of the tests • Pre-set penetration cycles standard compliant • Customizable programs for research tests • Easy data transfer simply using a USB stick • Free fall or guided fall option • LCD, TFT, 800x480 pixels, 7" touchscreen • 2 USB ports • Internal encoder with 0,1 mm resolution • Windows-based interface (PC not required) • Minimum time between penetrations time: 15 seconds • Mobile probe (300g) included • EN needle (Ø 1,13 mm) and ASTM needle (Ø 1 mm) included • EN mold (Ø70/80) and ASTM mold (Ø60/70) included • Power Supply: 120/230V 1ph 50-60Hz 50W • Dimensions: 240 x 360 x 440mm Vicat Machine, Auto, 120/220V 50/60HzH-3052A.3F Ship wt. 37.6lbs. (17kg) Automatic Vicat Machine Software Software ''Vicatpro" & Software Enablement for use with H-3052 Automatic Vicat Machine. Automatic Vicat Machine SoftwareH-3052.4M Ship wt. 0.1lbs. (0.04kg) Vicat Apparatus, Automatic ASTM C187, C191, AASHTO T131, EN 196-3; BS4550 This automatic Vicat Apparatus provides a com- pletely automatic method for determining the initial and final setting time of cements or mortar pastes. The HA-3056 is supplied complete with an ASTM or EN needle depending on model chosen; a vicat mold 70/80 dia. x 40mm height; sample container (water bath); 500 sheets of plotting paper; final set needle; cleaning strip; tweezer, T-wrench and delay timer. ASTM-Vicat Apparatus, Auto, 120/220V 50/60HzHA-3056.3F EN-Vicat Apparatus, Auto, 120/220V 50/60HzHA-3056EN.3F Ship wt. 37lbs. (17.6kg) Vicat Apparatus, Computer-Controlled, Single Station ASTM C187, C191 Method B, C472; AASHTO T131; EN 196-3, EN 480-2; NF P15/431 and BS 4550 This automatic computer-controlled Vicat unit provides a completely automatic method for determining the initial and final setting time of cements or mortar pastes. It automatically mon- itors the setting process and provides output curves of the process. The test sequence is pro- grammable. Tests can be performed in air or in a temperature-controlled water bath. The unit pro- vides automatic registration of initial set and final set times, as well as providing setting plots of the entire sequence. The supplied plunger and needle weight is 300g ±1g. The Vicat needle is automati- cally cleaned after each penetration. Includes: (1) Vicat mold (conical hard plastic ring); (1) glass base plate; (1) centering for Vicat mold; (1) pair of cleaning brushes; (1) t-wrench, 1.25 mm; (1) t-wrench, 2 mm; (1) spare glass plate; (2) spare initial-set needles. PC or laptop required for operation–not included. All units: 120/220V 50/60Hz Vicat Apparatus— ASTM, Single Station, 120/220V 50/60HzHC-3056.3F Vicat Apparatus— EN, Single Station, 120/220V 50/60HzHC-3056EN.3F Vicat Apparatus— ASTM/EN, Single Station, 120/220V 50/60HzHC-3056C.3F Ship wt. 154lbs. (70kg) HA-3056 DescriptionModel EN Initial set needle, 1.13mm dia. x 57mm length HA-3056.2 EN Final set needle with special foot, 1.13mm dia. HA-3056.5 ASTM Initial set needle, 1.0mm dia. x 57mm length HA-3056.9 EN Vicat mold, 70/80 dia. x 40mm HA-3056.6 ASTM Vicat mold, 60/70 dia. x 40mm HA-3056.10 Plotting Paper (500 sheets) HA-3056.1 Recording Pen (1) HA-3056.3 Sample Container (140 x 60mm) HA-3056.8 Glass Base Plate HA-3056.7 Cleaning Strip for Needle HA-3056.4 HA-3056 Accessories, Spare Parts HA-3056 Accessories, Spare Parts (see next page) H-3052A.3F HC-3056.3Fwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CEMENT 251Vicat Testing Vicat Apparatus— Multi-Station, Computer-Controlled ASTM C187; C191 Method B; C472; AASHTO T131; EN 196-3, EN 480-2; EN 13279-2; EN 13454-2; EN 13963; NF P15/431 and BS 4550 These automatic computer-controlled Vicat units provide a completely automatic method for deter- mining the initial and final setting time of cements or mortar pastes. Available in single (previous page), 6-, 8- and 12- station models these vicat machines automat- ically monitor the setting process and provides output curves of the process. The test sequence is programmable. Tests can be performed in air or in a temperature-controlled water bath. The unit provides automatic registration of initial set and final set times, as well as providing setting plots of the entire sequence. The supplied plunger and needle weight is 300g ±1g. The Vicat needle is automatically cleaned after each penetration. Units Include: the corresponding number of Vicat molds (conical hard plastic ring); glass base plates; and centerings for Vicat molds; plus (1) pair of cleaning brushes; (1) t-wrench, 1.25 mm; (1) t-wrench, 2 mm; Filter Sponge (coarse and fine); (2) spare glass plate; (2) spare initial-set needles. *EN480: Automatic pick-up and drop-off of an additional weight of 700g ± 1 g. (drop rod total 1kG). Automatic interception of the drop rod above the glass plate when using the additional weight. Second internal cooling stage for temperature control of the water bath in the range of +5°C to 60°C. PC or laptop required for operation–not included. All units: 120/220V 50/60Hz Vicat Apparatus— 6-Station, ASTM— 120/220V 50/60HzHC-3057.3F EN— 120/220V 50/60HzHC-3057.3F ASTM/EN— 120/220V 50/60HzHC-3057C.3F EN-Gypsum— 120/220V 50/60HzHC-3057G.3F EN-Cement-Gypsum— 120/220V 50/60HzHC-3057GZ.3F Ship wt. 215lbs. (97.5kg) Vicat Apparatus— 8-Station, ASTM— 120/220V 50/60HzHC-3058.3F EN— 120/220V 50/60HzHC-3058EN.3F ASTM/EN— 120/220V 50/60HzHC-3058C.3F EN-Gypsum— 120/220V 50/60HzHC-3058G.3F EN-Cement-Gypsum— 120/220V 50/60HzHC-3058GZ.3F Ship wt. 237lbs. (108kg) Vicat Apparatus— 12-Station, ASTM— 120/220V 50/60HzHC-3059.3F EN— 120/220V 50/60HzHC-3059.3F ASTM/EN— 120/220V 50/60HzHC-3059C.3F EN-Gypsum— 120/220V 50/60HzHC-3059G.3F EN-Cement-Gypsum— 120/220V 50/60HzHC-3059GZ.3F Ship wt. 430lbs. (195kg) DescriptionModel Needle 1.13mm dia., EN 196-3 HC-3057.13 Needle 1.0mm dia., ASTM C191 HC-3057.14 EN ring Ø70/80 x 40mm HC-3057.02 ASTM ring Ø60/70 x 40mm HC-3057.03 Glass plate, 120mm HC-3057.07 Cleaning brushes, 1 pair HC-3057.08 700g weight for EN 480-2 HC-3057.10 HC-3056, HC-3057, HC-3058 & HC-3059 Replacement Parts HC-3058.3F HC-3059.3F HC-3057.3Fwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 252 CEMENT Vicat Testing H-3050 H-3060 H-3133 H-3134 H-3135 H-3137 Vicat Consistency Apparatus ASTM C91, C141, C187, C191, C308, C451, C472; AASHTO T129, T131, T186 Reversible stainless steel plunger with 10mm dia. on one end and threaded, H-3070 1mm dia. stain- less steel needle on the other. Weight of plunger assembly with adjustable indicator is 300g total. This includes the 1mm stainless needle. Gradu- ated 0-50mm scale. Includes frame with bakelite platform, graduated 0-50mm scale, reversible plunger assembly with H-3070 1mm diameter stainless steel needle, H-3080 conical mold and H-3049 glass plate. Vicat Consistency ApparatusH-3050 Ship wt. 5lbs. (2.2kg) Vicat Apparatus, Modified, 400g ASTM C191, AASHTO T131, EN196/3 Modified vicat apparatus with 10mm dia. plunger and H-3061 100 gram weight. Weight of plunger assembly with adjustable indicator is 400g total. Includes graduated 0-50mm scale, frame with bakelite platform, plunger assembly, H-3080 con- ical mold and H-3049 glass plate. Vicat Apparatus, Modified, 400gH-3060 Ship wt. 4.6lbs. (2kg) Vicat Consistency Apparatus, Modified, 50g ASTM C110 Modified consistency vicat apparatus with 19mm dia. aluminum plunger on .25" rod. Weight of plunger assembly with adjustable indicator is 50g total. Includes graduated 0-50mm scale, frame with bakelite platform, plunger assembly, H-3080 conical mold and H-3049 glass plate. Vicat Consistency Apparatus, Modified, 50gH-3090 Ship wt. 5lbs. (2.7kg) Vicat Apparatus, Set Time & Consistency ASTM C807 Designed to switch between 17.5mm dia. plunger for consistency determinations and a 2mm dia. needle for time of set determinations. Plunger assembly with adjustable indicator weighs 400g with 17.5mm needle attached and 300g with 2mm needle. Includes graduated 0-50mm scale, frame with bakelite platform, plunger assembly with adjustable indicator and H-3086 brass ring mold (76mm ID x 40mm). Vicat Apparatus, Set Time & ConsistencyH-3085 Ship wt. 4.7lbs. (2.1kg) Vicat Consistency Apparatus, Modified, 30g ASTM C110 Modified consistency vicat apparatus with 12.5mm dia. aluminum plunger on .25" rod. Weight of plunger assembly with adjustable indi- cator is 30g total. Includes graduated 0-50mm scale, frame with bakelite platform, plunger assembly, H-3080 conical mold and H-3049 glass plate. Vicat Consistency Apparatus, Modified, 30gH-3120 Ship wt. 10lbs. (4.5kg) Modified Vicat Cone Penetrometer, 100g American Dental Association Features a 35g magnesium cone with a 65g brass weight for a total plunger weight of 100g. Includes frame with bakelite platform, graduated 0-50mm scale, magnesium cone plunger assembly with adjustable indicator, 65g weight and H-3080 conical mold. Modified Vicat Cone Penetrometer, 100gH-3134 Ship wt. 6.8lbs. (3kg) Modified Vicat Cone Penetrometer, 35g ASTM C472 Used to evaluate unsanded plaster. Features a magnesium cone and plunger assembly with a total weight of 35g. Includes frame with bakelite platform, graduated 0-50mm scale, magnesium cone plunger assembly with adjustable indicator and H-3080 conical mold. Modified Vicat Cone Penetrometer, 35gH-3135 Ship wt. 6.8lbs. (3kg) Modified Vicat Cone Penetrometer, 50g ASTM C472 Used to evaluate unsanded plaster. Features a magnesium cone and plunger assembly, which includes a 15g weight for a total plunger weight of 50g. Includes frame with bakelite platform, grad- uated 0-50mm scale, magnesium cone plunger assembly with weight and adjustable indicator and H-3080 conical mold. Modified Vicat Cone Penetrometer, 50gH-3137 Ship wt. 4lbs. (1.8kg) Modified Vicat Cone Penetrometer, 200g ASTM C780, C185 Used to evaluate unsanded plaster. Features an aluminum cone, 1.625" x 3.625" (41.3 x 92.08mm) and blunted to a hemisphere a distance of .125" (3.2mm) for an overall length of 3.5" (88.9mm) and plunger assembly with adjustable indicator. Total plunger weight is 200g. Includes frame with bakelite platform, aluminum cone plunger assem- bly with adjustable indicator and H-3840 400ml brass measure cup as specified for ASTM C185. Modified Vicat Cone Penetrometer, 200gH-3133 Ship wt. 7lbs. (3.1kg) H-3120 H-3090 H-3085www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CEMENT 253Vicat Testing Conical Mold, Plastic Plastic mold, 70mm bottom dia. x 60mm top dia. x 40mm high. For use with all Vicat apparatuses. Conical Mold, PlasticH-3080 Ship wt. 0.6lbs. (0.2kg) Mold, Brass Brass mold, 76mm dia. x 40mm high. For use with H-3085 vicat apparatus. Mold, BrassH-3086 Ship wt. 0.5lbs. (0.2kg) Mold Container ASTM C359 Mold for use in false set test. 2" x 2" x 6" (51mm x 51mm x 152mm) Overall length including base is 9.25" (235mm). Mold ContainerH-3065 Ship wt. 1lbs. (0.4kg) Glass Plate Glass plate, 4" x 4" x .1875" (101.6mm x 101.6mm x 4.762mm). For use with H-3050, H-3060 and H-3090 vicat apparatus. Glass PlateH-3049 Ship wt. 0.4lbs. (0.1kg) Measure, 400ml ASTM C185, C780; AASHTO M152 Calibrated to 400ml, this measure is used to determine air content of hydraulic cement mor- tar. Cylindrical with 3" (76mm) ID, approximately 3-15/32" (88mm) depth. Measure, 400mlH-3840 Ship wt. 2.3lbs. (1.04kg) H-3070, H-3072 H-3072M H-3075, H-3073 H-3147 H-3065 H-3049 H-3080 H-3086 H-3138 H-3136 H-3055 H-3060.1 H-3085.1 Replacement Plunger AssembliesVicatPlunger Plunger assembly: plunger, needle and indicator, 300gH-3050H-3055 Plunger assembly: plunger, weight and indicator, 400gH-3060H-3060.1 Plunger assembly: plunger and indicator, 300gH-3085 H-3085.1 Plunger assembly: plunger, needle, weight and indicatorH-3090H-3110 Plunger assembly: plunger, needle, weight and indicatorH-3120H-3130 Plunger assembly: plunger, cone, weight, indicator, and (2) bushingsH-3134H-3134.1 Plunger assembly: plunger, cone, indicator and (2) bushingsH-3135H-3135.1 Plunger assembly: plunger, cone, weight, indicator and (2) bushingsH-3137H-3137.1 Plunger assembly: plunger, cone and indicatorH-3133H-3133.1 NeedlesVicatNeedle 1mm dia. stainless steel with knurled threaded holder H-3050 H-3085 H-3070 1.13mm dia. stainless steel with knurled threaded holderH-3072 Initial set needle, 1.13mm dia. x 45mm, BS EN 196-3. H-3072M Final set needle, 1.13mm dia., BS EN 196-3.H-3073 Initial and final set needle, ASTM C191 H-3075 2mm dia., stainless steel vicat needleH-3147 17.5mm dia., stainless steel vicat needleH-3085.1.1 WeightsVicatWeight 100g weight replacement for H-3060H-3060H-3061 100g weight, increases H-3090 to 150gH-3090H-3100 100g weight replacement for H-3137H-3137H-3136 65g weight replacement for H-3134H-3134H-3138 H-3840 H-3134.1H-3110H-3130H-3135.1H-3137.1www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 254 CEMENT Length Change Comparison H-3250 H-3250D H-3250.8 Length Comparator, Dial Indicator ASTM C151, C157, C227, C311, C341, C342, C452, C490, C596; AASHTO M210, T107, T160. Length comparators measure length changes of hardened cement paste, mortar and concrete prismatic specimens. Indicators are mounted on a sturdy upright support attached to a solid triangu- lar base. All units Include stationary and movable anvils designed to fit H-3260 gauge studs, which are cast into test specimens and an invar refer- ence bar. Comparators for 10" (254mm) or 16" (406mm) effective length samples with 3.625" (92mm) dia. dial gauge with a range of .400" and gradations of .0001". The Dial is marked 0-10. Includes stationary and movable anvils designed to fit the H-3260 gauge studs that are cast on test specimens and an invar reference bar. Unit accommodates test specimens up to 4" x 4" (102 x 102mm) cross section. Length Comparator, 10" Effective LengthH-3250 Length Comparator, 16" Effective LengthH-3248 Ship wt. 32.7lbs. (14.8kg) Length Comparator, Digital Indicator ASTM C151, C157, C227, C311, C341, C342, C452, C490, C596; AASHTO M210, T107, T160. Length comparators measure length changes of hardened cement paste, mortar and concrete prismatic specimens. Indicators are mounted on a sturdy upright support attached to a solid trian- gular base. All units Include stationary and mov- able anvils designed to fit H-3260 gauge studs, which are cast into test specimens and an invar reference bar. Comparators for 10" (254mm) or 16" (406mm) effective length samples with digital indicator with a range of .600" and resolution of .0001". Measures inches and millimeters includes batteries. Unit can be zeroed at any point on the range and can be switched from inches to mm by pressing a button. Includes stationary and movable anvils designed to fit the H-3260 gauge studs that are cast on test specimens and an invar reference bar. Unit accommodates test specimens up to 4" x 4" (102 x 102mm) cross section. Length Comparator, 10" LengthH-3250D Length Comparator, 16" LengthH-3248D Ship wt. 36.5lbs. (16.8kg) Comparator Replacement Components Custom size Invar Reference Bars are avail- able, please inquire: 1.800.544.7220. DescriptionModel Invar reference bar for use with H-3250 and 10" (254mm) specimens H-3249A Invar reference bar for use with H-3248 and 16" (406mm) specimens H-3249A.16 Invar Sleeve H-3249.2 Dial Indicator H-3250.3 Digital Indicator H-3250.3DA Anvil, Top with collar (one each) H-3250.4 Anvil, Top only H-3250.4.4 Collar w/ set screw H-3250.4.3 Elevating screw, nut collar & anvil assembly, Bottom H-3250.7 Adapter for 5" specimens H-3250.8 For Molds, please see page 239 ACCESSORIES H-3250.3 H-3250.3DA H-3250.7 H-3249.2 H-3249A H-3250.4.3 H-3250.4.4 H-3250.4 Length Comparators can be custom made for any length prism molds NOTESwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CEMENT 255Bond Strength, Ultrasonic Measuring Multiple Bond Strength Pull-off Tester, MHP400 EN 12004-2, EN 12002, EN 1324, DIN 1048-2, DIN 13279-2, EN 13892-8, ISO 4624 (more) The multiple Bond Strength Pull-off Tester is used for testing bond strength of adhesives, mortar, coatings paints, etc. It provides computer-con- trolled test execution and evaluation. Tester is optimized for 400 x 400mm plates to glue on samples, for example 50 x 50mm (test stamps must be ordered separately) Double-op- erative test cylinder in servo slide quality (extra low-friction), with piston stroke 100 mm and a rotation prevention Massive, torsion-resistant machine frame for optimal determination of malleability until sam- ple destruction (requires position measurement system). Heavy-duty, linear slides for easy inser- tion of test plates. Lifting table with two-handed control to position test plate on the counter holder, which can be adjusted for testing different plate heights. Positioning of traction body is via low-friction linear slides. Machine frame bolts to control cabinet. (Optional: prepared for connec- tion with a control cabinet of a standard cement/ mortar testing machine) Control cabinet Control cabinet with main switch, under-voltage release and emergency stop switch, as well as a Schuko socket on the front panel. Connection plug CEE plug 16 A (3~ 400 V, 50 Hz). Universal, digi- tal measuring and control electronics is provided. The control electronics enable a fully-automatic test execution with given loading speeds for force-controlled tests (position and strain-con- trolled tests optional) With sensitive and adjust- able break detection, the failure of the sample is detected early. Hydraulic system The powerful hydraulic unit with 20L oil tank included with all necessary safety, control and directional valves according to DIN 4413. It gener- ates a maximum system pressure of 350 bar and a volume flow of 1.2 L / min. A fine 3μm pressure filter in the pressure line filters the hydraulic oil for protecting the system components. Includes filter pollution, oil level and temperature switch (80°C) The hydraulic unit is placed inside of the control cabinet and is thereby particularly low noise <66 dB (A). A high-quality, servo valve for pressure or volume flow control enables the most precise force and stroke control (closed-loop control). Includes Test and Motion Software preinstalled and configured on All-in-one PC. Machine requires configuration quote for specific application to determine price. Multiple Bond Strength Pull-off Tester HC-3060A.4F Ship wt. 1443lbs. (650kg) HC-3060A.4F Accessories, Spare Parts Ultrasonic Measuring System This 8-channel, ultrasonic measuring system is specifically designed to measure the setting times of materials, such as cement, mortar, gypsum and concrete. The system is comprised of eight (8) measuring units with ultrasonic probes and temperature sensors, which are connected to an 8-channel hub. This hub is connected, via a USB cable, to a PC computer running the control soft- ware, which allows control and evaluation of each measuring unit. The system provides a high-precision (0.05 µs resolution) monitoring of the complete setting process from mixing to 28-day consistency in one test. The software provides an intuitive user-in- terface with direct-reading results from differ- ent modelings. The system provides a very-high reproducibility of the measurement results. It is able to detect deviations in the results early in the testing stage, which can speed up the testing pro- cess and provide an optimal process for maintain- ing quality control of production and a substantial reduction in development times and costs. Features: •Measuring Period: 15 minutes - 31 days •Measuring Interval: 10 seconds - 60 minutes •Ultrasonic velocity in m/s or runtime in μs •Derivation (acceleration) and curvature •Temperature inside the specimen •Various zoom and scaling features also during the tests •Reference measurements: online comparison of running measurements •Envelope curves: definition of acceptable deviations from reference measurements •Detection of initial set and final set •Evaluation, Excel-export and printing during the running measurements •Automatic logging of all measurements •Log file browser with sort function (e.g. date product, filename, user) •Calculation of dynamic modulus of elasticity Includes UltraTestLab © Control Software. Requires PC computer, not included. Ultrasonic Measuring SystemHC-3070.3F Ship wt. 16lbs. (7.2kg) HC-3070.3F Specifications Capacity 4500 lbs. (20kN) Force display range 0 - 20kN, class 1 Stroke 3.93" (100mm) Platen dimension 15.78" x 15.78" (400 x 400mm) Sample size 1.96" x 1.96" Ø50 (1.96") (50 x 50mm) Power 3ph. 230V 50/60Hz Dimensions (1200 x 800 x 1600mm) 47.24" x 31.49" x 62.99" HC-3060A.4F DescriptionModel Stainless steel pulling plate 50mm dia. HC-3060A.1 SS Square pulling plate 50 x 50mm HC-3060A.2 Draw bolt for pulling plate HC-3060A.3www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 256 CEMENT Humidity Curing Cabinets, Shrinkage Channel Humidity Curing and Storage Chambers ASTM C109; EN 196-1 These humidity cabinets have been designed specifically for the curing and storage of mortar prisms and cubes in 3-gang molds. They feature durable stainless steel construction with durable specimen shelves that stand up to the loading and unloading of molds. These chambers maintain a curing temperature 20 - 27°C (68 - 81°F) at an accuracy of ±1°. A humidity reading of > 95% can be maintained. These parameters are maintained through the use of an electronic, adjustable controller for both temperature and humidity. Humidity Curing and Storage Chambers ASTM C109; EN 196-1 These upright humidity cabinets are available with 6, 8 or 12 shelves. Humidity Curing Chamber, 6-shelfHC-3040.4F Ship wt. 772lbs. (350kg) Humidity Curing Chamber, 8-shelfHC-3041.4F Ship wt. 794lbs. (360kg) Humidity Curing Chamber, 12-shelfHC-3042.4F Ship wt. 860lbs. (390kg) Workbench-Style Humidity Curing Chambers ASTM C109; EN 196-1 These humidity cabinets are designed as a work- bench to provide a work surface for a lab. They are available with 3, 6 or 9 shelves. Workbench Curing Chamber, 3-shelfHC-3043.4F Ship wt. 529lbs. (240kg) Workbench Curing Chamber, 6-shelfHC-3044.4F Ship wt. 661lbs. (300kg) Workbench Curing Chamber, 9-shelfHC-3045.4F Ship wt. 882lbs. (400kg) Data Box, Shrinkage Channel The Databox has a modular structure allowing 1 to 4 shrinkage channels to be connected. The power supply (USB) is via PC connection. • Measurement sequence control with test plan • Timer function for automatic measurement • Measurements independently of each other running in parallel on different channels • Automatic storage • Data output in an Excel-compatible chart • Software (Windows) includes 1 basic license for 1 port. For each additional channel an additional license and a connection cable must be purchased. A standard PC with monitor, is required, but not supplied Data Box, Shrinkage ChannelHC-4792 Ship wt. 2.2lbs. (1kg) Shrinkage Channel The Shrinkage Channel is used to test grout and floating screed for shrinkage and expansion. Channel is made from stainless steel and the front has stabilizing claws. Measuring sample length is 1000mm. Channel width is 100mm at the top and 90mm at the bottom. Depth is 50mm. Includes digital gauge with data output. Measuring range is 12mm with an accuracy of 0.01mm. Shrinkage ChannelHC-4791 Ship wt. 12.1lbs. (5.5kg) Water bath for Standing Mortar Prisms EN 196-1 Consisting of: ·Stainless steel frame with 2 plastic tanks • Wet storage capacity for 230 specimens • Plastic grating to fix the specimens • Thermostat heating system • Without cooling device • Dimensions: (wxdxh) = 46.8" x 28.1" x 49.8" (1190 x 715 x 1265mm) • 400V 60Hz, 3ph with 16 A CEE plug Water bath for Mortar PrismsHC-3046.4F.3 Ship wt. 253lbs. (115kg) HC-3043.4F HC-3042.4F SpecificationValue Capacity 3-Shelf Model 12 EN 196 molds, 30 ASTM C109 2" cube molds 6-Shelf Model 24 EN 196 molds, 60 ASTM C109 2" cube molds 9-Shelf Model 36 EN 196 molds, 90 ASTM C109 2" cube molds Dimensions 3-Shelf Model 63" x 31.4" x 35.4" (1600 x 800 x 900mm) 6-Shelf Model 89" x 31.4" x 35.4" (2255 x 800 x 900mm 9-Shelf Model 104" x 31.4" x 35.4" (2650 x 800 x 900mm Power230V 50/60Hz - 1200W SpecificationValue Capacity 6-Shelf Model 24 EN 196 molds, 60 ASTM C109 2" cube molds 8-Shelf Model 32 EN 196 molds, 80 ASTM C109 2" cube molds 12-Shelf Model 48 EN 196 molds, 120 ASTM C109 2" cube molds Dimensions All Models 55" x 31.4" x 761400" (1400 x 800 x 1930mm) Power230V 50/60Hz - 1200W HC-3046.4F.3 HC-4791 HC-4792www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 CEMENT 257Marsh Funnel, Mud Balance H-4790A H-4791 Mud Balance ASTM D4380 The mud balance provides a simple, practical method for the accurate determination of fluid density. The item’s durable aluminum construction makes it ideal for field use. It’s high-impact plastic case protects the balance during transport while providing a secure base for the balance during use. Scale reads in pounds per gallon (6-24 lb/ gal); specific gravity (0.72-2.88 gms/cm3); pounds per cubic foot (45-180 lb.cu ft), and pounds per square inch per 1,000 feet of depth (310-1250 lb/ sq in/100ft of depth). The H-4790A mud balance meets all the requirements of the API standard procedures for testing water base drilling fluids, oil base drilling fluids and oil well cements. Mud BalanceH-4790A Ship wt. 5lbs. (2.2kg) Tru-Wate Density Balance ASTM D4380 The TRU-WATE Mud Balance is an instrument for measuring the absolute density of a fluid sample. With the TRU-WATE Balance, the density of a fluid sample, such as cement slurry, can be mea- sured in a fixed volume sample under pressure. By pressurizing the sample cup the entrained air or gas can be decreased to a negligible volume, thus providing a slurry density measurement more closely in agreement with the true density which will be realized under down-hole condi- tions. This density balance is constructed of pre- mium metals for durability, accuracy and ease of use. A high impact plastic case protects the bal- ance during transport and provides a secure base in its working position. TRU-WATE Density BalanceH-4791 Ship wt. 5lbs. (2.2kg) Marsh Funnel Viscometer ASTM D6910 The marsh funnel viscometer is a rugged, easy to operate instrument that is used for making rapid, on the spot measurements of drilling mud viscosity. Marsh funnel readings are only general measurements, but the frequent reporting of the marsh funnel viscosity will alert the mud engi- neer to sudden changes in the mud viscosity that could require corrective action. The marsh funnel Viscosity is the ratio of the speed of the mud as it passes through the outlet tube (the shear rate) to the amount of force— the weight of the mud itself, which is causing the mud to flow (the shear stress). marsh funnel viscosity is reported as the number of seconds required for one quart of mud to flow out of a full marsh funnel. Marsh Funnel ViscometerHC-2842 Ship wt. 3lbs. (1.3kg) 1 Liter Measuring Cup for Marsh Funnel 1 liter, plastic measuring cup used for collecting sample from marsh funnel. 1 Liter Measuring CupHC-2843A Ship wt. 1lbs. (0.45kg) 1 Liter Measuring Cup for Marsh Funnel 1 liter, plastic measuring cup used for collecting sample from marsh funnel. 1 Liter Measuring CupHC-2843 Ship wt. 1lbs. (0.45kg) Sand Content Test Set ASTM D4380 The sand content kit is a simple, accurate and inexpensive sieve analysis apparatus for deter- mining the sand content of drilling muds. The sand content kit consists of a special 200-mesh sieve 2.5" in diameter, fastened inside a collar upon which a small funnel is fitted on either end. This is used with a 10 ml glass measuring tube, graduated to read from 0 to 20% the percent- age sand by volume. The collar and funnel are made of polyethylene and the screen is made of brass. A 500ml wash bottle and carrying case are included. Sand Content Test SetHC-2845A Ship wt. 3lbs. (1.3kg) Mat Depth Gauge, Fireproofing Gauge for measuring the depth of fireproof- ing. Plastic body with steel probe. Range: 0-6" (0-150mm). Mat Depth Gauge, FireproofingH-2818 Ship wt. 0.3lbs. (0.13kg) Mat Depth Gauge, Fireproofing Gauge for measuring the depth of fireproof- ing. Plastic body with steel probe. Range: 0-3" (0-76mm). Mat Depth Gauge, FireproofingH-2818HD Ship wt. 0.3lbs. (0.13kg) Mat Depth Gauge, Fireproofing Gauge for measuring the depth of fireproof- ing. Plastic body with steel probe. Range: 0-3" (0-76mm). Mat Depth Gauge, FireproofingH-2818MS Ship wt. 0.3lbs. (0.13kg) HC-2842 HC-2843 HC-2845A H-2818HD H-2818 H-2818MS HC-2843ANext >