< Previouswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 268 ASPHALT Asphalt Binder Testing— Ductility H-1068.100 Cover for Ductilometers (Clear, Acrylic) Temperature control cover made from clear acrylic sheet. Can be used with all ductility machines, except HA-1060, which comes with one. Ductility Machine CoverH-1068PC Shipping wt. 40 lbs (18kg) Ductilometer Stand Designed for use with Humboldt Ductilometers, places machine at working height and includes a shelf for circulating temperature controller. Fea- tures square steel legs. Needs assembly. Ductilometer StandH-1068.100 Shipping wt. 200 lbs (90.7kg) Ductility Briquette Mold ASTM D113 Mold for making test briquettes for use with any ductility testing machine. H-1080 briquette mold has angled sides for use in standard test. Four accurately machined interlocking brass segments are interchangeable with same parts from different molds; no parts identification marks are needed for matching. End piece that holds specimens being elongated are provided with mounting holes. Ductility Briquette MoldH-1080 Shipping wt. 0.8 lb (0.36kg) Elastic Recovery Mold ASTM D5892, D6084, AASHTO T301 Mold for making test briquettes for use with any ductility testing machine. H-1030 briquette mold has straight sides for use in forced tests. Requires H-1090 or H-1090.3 base plates. Four accurately machined interlocking brass segments are inter- changeable with same parts from different molds; no parts identification marks are needed for matching. End pieces, designed to hold specimens being elongated, are provided with mounting holes. Elastic Recovery MoldH-1030 Shipping wt. 1.1 lb (0.49kg) Base Plate Brass, base plate for single mold. Flat surface provides uniform contact with mold and surfaces. 5.5" x 2" x .125" (140 x 51 x 3mm) Base Plate, Single MoldH-1090 Shipping wt. 0.6 lbs (0.27kg) Base Plate, Triple Mold Brass base plate for triple mold. Flat surface pro- vides uniform contact with bottom surfaces mold. 5.5" x 8" x .125" (140 x 203 x 3mm) Base Plate, Triple MoldH-1090.3 Shipping wt. 1.8 lbs (0.8kg) Force Determination Transducer Force Determination Transducer for use with Humboldt Elite Series Ductilometers. Provides precise tensile strength measurement of any material, preparation, procedure or type of test to an accuracy of 0.01 lbs. Attaches over existing pin in Ductilometer without tools or machine modifi- cation. Elite Series Ductilometers can accommo- date up to 3 transducers. Force Determination TransducerHA-1061 Shipping wt. 4 lbs (2.3kg) Force Determination Kit for Manual Ductilometers This force determination kit is designed for use with manual control ductilometers like the H-1068X and H-1068B. It provides (1) Force Determination Transducer, (1) HM-5320 Data Logger and (1) Force Transducer Calibration Device. This kit will allow you to do force determinations and the Data Logger will allow you to monitor the test and its results. Humboldt’s Elite Series Data Logger pro- vides four individual, 24-bit analog to digital con- verters with an instrumentation excitation supply of 10 VDC. The Analog Logger is ideal for use with instruments, such as pressure transducers, load cells, and strain transducers. It provides data stor- age for 1000 readings per channel. See page 151 for more information. Additional HA-1061 Trans- ducers can be added to this starter kit. Force Determination KitHA-1063 Shipping wt. 30 lbs (13.6kg) Calibration Device For Force Transducers Calibration device for Humboldt Elite Series Ducti- lometer force determination transducers. Provides simple and precise calibration of transducers. Includes (1) calibration pedestal, (1) storage ped- estal, (1) dead-weight hanger and (1) weight set. Does not include Transducer. Calibration Device, Force TransducersHA-1062 Shipping wt. 15 lbs (6.8kg) H-1080 H-1090 H-1090.3 H-1068PC HA-1063 HA-1061 HA-1062 H-1030www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 269Asphalt Binder Testing— Penetration H-1352 H-1394 H-1240DA H-1200 Penetrometer, Universal ASTM D5, D217, D1168, D1321, D1403, D1831, D5329; AASHTO T49, T187 and others Direct-reading instrument for precision pene- tration measurements of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetics and pharmaceutical products. Unit has 5" diameter indicator dial, graduated in 400 divisions of 0.1mm, corresponding to 40mm pen- etration. Zero preset to eliminate errors. Includes 47.5g plunger with 3.2mm hole, and two loading weights (50g and 100g). Overall dim. 10.5" x 13" x 22" (266.7 x 330.2 x 558.8mm). Penetrometer, UniversalH-1200 Shipping wt. 25 lbs (11kg) Penetrometer, Electric ASTM D5, D217, D1168, D1191, D1321, D1403, D1831, D1855; AASHTO T49, T187 and others Takes our H-1200 universal penetrometer and adds an automatic digital timer to it. The timer’s release mechanism is switchable between sec- onds minutes, or hours. Timer may be set in 1/10th second intervals. Plunger releases with push of a button, and automatically stops after the preset time duration. H-1240.4F adds a voltage adapter and internal switch on the timing mechanism to change cycle to 50Hz. Penetrometer, Electric, 120V 60HzH-1240 Penetrometer, Electric, 220V 50/60HzH-1240.4F Shipping wt. 32 lbs (15kg) Penetrometer, Digital ASTM D5, D217, D1168, D1191, D1321, D1403, D1831, D1855; AASHTO T49, T187 and others The H-1240DA penetrometer adds a digital gauge to the H-1240 electric penetrometer to provide precise, at-a-glance readings, as well as the ability to automatically start a test with a button push and have the test end after a preset duration. Penetrometer, Digital, 120V 60HzH-1240DA Penetrometer, Digital, 220V 50/60HzH-1240DA.4F Shipping wt. 26.2 lbs (11.8kg) Penetrometer for Battery Paste Battery Paste Penetrometer combines the H-1200 and a H-1255 grease cone, which has a hardened steel tip with a special plunger. Total needle weight is 60g ±.050g. Penetrometer for Battery PasteH-1202 Shipping wt. 25 lbs (11kg) Penetrometer, Portable ASTM D5, D217, D1168, D1191, D1321, D1403, D1831, D1855; AASHTO T49, T187 and others Lighter and smaller than H-1200 for field work, unit’s micrometer adjusts for accurate settings, as well as coarse adjustment for approximate set- tings. Only one additional 50g loading weight is included with a H-1280 needle. Overall dim. 7" x 7" x 16" (178 x 178 x 406mm). Penetrometer, PortableH-1250 Shipping wt. 14 lbs (6.3kg) Penetrometer for Battery Paste, Portable Battery Paste Penetrometer combines the H-1250 and a H-1255 grease cone, which has a hardened steel tip with a special plunger. Total needle weight is 60g ±.050g. Penetrometer for Battery Paste, PortableH-1252 Shipping wt. 9 lbs (4.08kg) Water Baths ASTM D6927, D5581 and D4867 Microprocessor-based control for precise tem- peratures throughout the range to 180°F. Includes magnetic circulator, ensuring constant water tem- perature, and, a stainless steel shelf, which stands 2" (51mm) above the bottom of the unit for free circulation of water above and below test sam- ples. The Deluxe model is aided by a magnetic stir bar, included. Volume is 7.76 gallons (29.40L) and dimensions are: ID: 19.5" W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm) Deluxe Water Bath, 120V 60HzH-1390 Deluxe Water Bath, 220V 50/60HzH-1390.4F Water Bath, 120V 60HzH-1392 Water Bath, 220V 50/60HzH-1392.4F Ship wt. 44lbs. (19.9kg) Large, Deluxe Water Bath ASTM D6927, D5581 and D4867 Microprocessor-based control for precise tem- peratures throughout the range. Includes a stain- less steel shelf, which stands 2" (51mm) above the bottom of the unit for free circulation of water above and below test samples aided with the included stir bar. Volume is 14 gallons (53L) and dimensions are: ID: 20" W x 20" D x 10" H (508 x 508 x 254mm). Large, Deluxe Water Bath, 120V 60HzH-1394 Large, Deluxe Water Bath, 220V 50/60HzH-1394.4F Ship wt. 43lbs. (19.5kg) Economy Water Bath Low-cost alternative water bath for heating spec- imens holds eight standard 4" stability molds. Supporting shelf above the bottom allows water circulation around specimens. Automatic ther- mostatic control with a range of 150° to 500°F (65° to 160°C). ID 11.5" x 19.5" x 5.5" (293 x 497 x 140mm) deep. H-1380.4F uses a step- down transformer, which is included, for electric conversion. Deluxe Water Bath, 120V 60HzH-1380 Deluxe Water Bath, 220V 50/60HzH-1380.4F Ship wt. 18lbs. (18.16kg) Transfer Dish ASTM D5 Plastic transfer dish has flat bottom, straight sides and metal centering lugs with magnet in the bot- tom. Size is: 3.75" dia. x 3.25" deep (95 x 83mm). Transfer DishH-1352 Shipping wt. 0.9 lb (0.4kg) H-1240 H-1250 H-1252 H-1390www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 270 ASPHALT Asphalt Binder Testing— Penetration H-1392 Bituminous materials ASTM D5; AASHTO T49, IP49; ASA Std. A37.1; Fed Spec. SS.R. 406C, Meth. 214.01 Standard hardened stainless steel needle, 40-45mm exposed needle length. Wt. 2.5g. H-1280 Standard hardened stainless steel needle, 40-45mm exposed needle length. Certified to ASTM accuracy by independent laboratory. Wt. 2.5g. H-1300 Long hardened stainless steel needle, 50- 55mm exposed needle length. Wt. 2.5g. H-1290 Long hardened stainless steel needle, 50- 55mm exposed needle length. Certified to ASTM accuracy by independent laboratory. Wt. 2.5g. H-1302 Waxes with 250 or less penetration ASTM D1321 Hardened stainless steel wax penetration needles with tapered point, blunt tip of truncated cone. Ferrule is approx. 3.2mm dia. Wt. 2.5g. H-1310 Same as H-1310. Certified to ASTM accuracy. H-1317 Battery paste Hardened stainless steel tip with special plunger. Total wt. 60g ± .050g. H-1255 Joint sealant for asphalt & con- crete pavements ASTM D5329 Resilience ball penetration tool. Total wt. 27.5g. H-1320 Measuring firmness of solid and plasti- cized fats: shorten- ings, butters AOCS Cc 16-60 20° aluminum cone, 3.2mm ferrule,0.8mm stainless steel blunt tip. Overall length 106mm. Wt. 45g. H-1270 Recovery of used grease, small sam- ples ASTM D1403 1/4 scale. (Not considered a substitute for full-size cone specified in ASTM D217.) Wt. 9.38g H-2519 Grease testing pen- etrometers ASTM D217, D937 ASA Std. Z11.3 Hollow 90° brass cone, highly polished stainless steel tip. Removable nut and stem. Wt. 102.5g. H-2520 Hollow 90° stainless steel cone, highly polished stainless tip. Removable nut and stem. Wt. 102.5g. H-2522 ASTM D2884 Hollow 90° Magnesium cone and plunger. Total cone wt. 30.0g H-2524 Food, Paste, Paints U.S. Dept of Agri- culture Hollow 90° Aluminum cone and tip. Total wt. 35g H-2529 Applications re- quiring 90°· cones, ASTM D217, D937 ASA std. Z11.3 Stainless steel replacement tip, nut and stem. H-2525 Penetration Needles and Cones H-1270 H-2519 H-1320 H-2529 H-2522 H-2520H-2524 H-1255 H-1310 H-1300 H-1302 H-1317 H-1280 H-1350.70 Sample Cups, Tin CapacityDimensionsQuantityModel 2.5 oz (71g)1.87" (47.5mm) ID, 1.42" (36mm) deep48H-1350.3A 3 oz (85g)2.25" (57.1mm) ID, 1.42" (36mm) deep36H-1350.3 4.7 oz (133g)2.42" (61.5mm) ID, 1.67" (42.6mm) deep36H-1350.4A 5.6 oz (159g)2.59" (66mm) ID, 1.72" (43.4mm) deep36H-1350.6A 8.2 oz (232g)3.05" (77.5mm) ID, 1.97" (50mm) deep18H-1350.8A 16 oz (454g)4" (102mm) ID, 2.375" (60.3mm) deep1H-1350.16 42.3 oz (1200g)6.12" (155mm) ID, 3" (76.2mm) deep1H-1350.42 70.5 oz (2000g)6.12" (155mm) ID, 5" (127mm) deep1H-1350.70 ODIDHeightInside Ht. Volume cu. in./fl. oz. Model 2" (51mm) 1.975 (50mm) .875" (22mm) 0.865" (22mm) 2.650 (44cc) 1.47 (44ml) H-4926 2.5" (64mm) 2.470 (63mm) 1.75" (44mm) 1.746" (44mm) 8.366 (137cc) 4.64 (137ml) H-4927 3" (76mm) 3.000 (76mm) 1" (25mm) 0.985" (25mm) 6.963 (114cc) 3.86 (114ml) H-4928 3.5" (89mm) 3.490 (89mm) 2" (51mm) 1.990" (51mm) 19.037 (312cc) 10.55 (312ml) H-4929 Moisture Boxes, Aluminum Aluminum Moisture Boxes Flat-bottom, straight-side seamless aluminum box has tight fitting cover, which fits bottom of box as well. Protects sam- ple from exposure during storage and weighing operations. Aluminum Moisture BoxesSee chart below Sample Cups, Tin Flat-bottom, seamless tin sample cups have telescoping covers. Hold samples for determining penetrations. Sample Cups, TinSee chart to right H-4929www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 271Asphalt Binder Testing— Viscosity Saybolt Viscosity Bath ASTM D88, D244, E102; AASHTO T72 Designed for Saybolt universal and furol viscos- ity testing, this constant temperature bath 5030 meets all ASTM and AASHTO requirements for precise temperature control. The micro-processor PID circuitry assures accurate temperature control within ASTM tolerances throughout the range of ambient to 464°F (240°C). Temperature stability is ±0.05°F (±0.03°C) Simple push-button controls and dual digital dis- plays are used for easy setting and monitoring of the bath's temperature. With a capacity of four viscometers and 60ml receiving flasks, the bath features sliding draft shields, chemical-resis- tant alignment plates for handling of flasks and a glare-free fluorescent backlight for easy view- ing of test sample. The insulated bath interior is constructed entirely of heavy-gage stainless steel and the built-in overflow pipe and drain valve simplifies filling the bath oil to the required level. A chemical resistant top plate provides insulation and is easily removed to allow for cleaning of the bath interior. The bath is supplied complete with four thermometer supports, four port covers, four chained corks, two port closures, tube nut wrench, orifice wrench, withdrawal tube and oil strainer. Viscometer tubes, orifices, receiving flasks, oil and thermometers are not included and must be ordered separately. Saybolt Bath, 120V 60HzH-2165 Saybolt Bath, 220-240V 50/60HzH-2165.4F Shipping wt. 100 lbs (45.3kg) Saybolt Viscosity Bath, For Automatic Timers ASTM D88, D244, E102; AASHTO T72 Constant temperature viscosity bath designed for use with one to four Automatic Saybolt Viscos- ity Timing Sensors. Bath is sold with no timers, order auto timers separately. Features simple push-button controls and dual digital displays are used for easy setting and monitoring of the bath's temperature. With a capacity of four viscometers and 60ml receiving flasks, the bath features sliding draft shields, chemical-resistant alignment plates for handling of flasks and a glare-free fluorescent backlight for easy viewing of test sample. The insulated bath interior is constructed entirely of heavy-gage stainless steel and the built-in over- flow pipe and drain valve simplifies filling the bath oil to the required level. A chemical resistant top plate provides insulation and is easily removed to allow for cleaning of the bath interior. A cool- ing coil for tap water or refrigerated coolant is provided for operation at near-ambient tempera- tures. Steel cabinet has leveling feet and a chemi- cal-resistant polyurethane-epoxy finish. Temperature range is ambient to 464°F (240°C) and temperature stability is ±0.05°F (±0.03°C). Bath capacity is 5 gallons (19L) and recom- mended bath medium is water or suitable heat transfer fluid. Included accessories: Cleaning plunger; chained corks; oil strainer; withdrawal tube; tube nut wrench; orifice wrench; port clo- sures; port covers and thermometer supports. Saybolt Viscosity Bath, 120V 60HzH-2166A Saybolt Viscosity Bath, 220-240V 50/60HzH-2166A.4F Shipping wt. 82 lbs (37kg) Automatic Timers for Saybolt Viscosity Bath ASTM D88, D244, E102; AASHTO T72 At the push of a button, the automatic timer starts the sample flow, senses the 60mL end point and digitally records and displays the efflux time in 0.1 seconds resolution with an accuracy of 0.05%. Automatic timing improves testing accuracy and convenience, eliminating the chain and cork assembly and the need to manually time each sample. One to four automatic timers can be fitted to the H-2166A Saybolt viscosity bath. Saybolt Viscosity Timing Sensor, 120V 60HzH-2167 Saybolt Viscosity Timing Sensor, 220-240V 50/60HzH-2167.4F Shipping wt. 5 lbs (2.2kg) H-2165 H-2166A H-2166A shown with (4) Automatic Timers, which need to be ordered in addition to the H-2166A bath, see below. H-2167www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 272 ASPHALT Asphalt Binder Testing— Viscosity Components DescriptionModel Cleaning plungerH-2175 Borosilicate glass receiving flask, 60ml (for H-2165) H-2176 Borosilicate glass receiving flask, 60ml (for H-2166) H-2179 Withdrawal tubeH-2177 Oil strainerH-2178 Technical oil, white, (1 gal.) suit- able for use up to 230°F (110°C) H-2189 Bath Oil, High Temp (ASTM D88) for Saybolt 5 gallon, wt.40lb (18kg) H-2199A Displacement ringH-2194 Thermometer supportH-2195 Orifice wrenchH-2196 Socket wrenchH-2197 Thermometer* (66 to 80°F)H-2600.17F Thermometer* (19 to 27°C)H-2610.17C Thermometer* (94 to 108°F)H-2600.18F Thermometer* (34 to 42°C)H-2610.18C Thermometer* (120 to 134°F)H-2600.19F Thermometer* (49 to 57°C)H-2610.19C Thermometer* (134 to 148°F)H-2600.20F Thermometer* (57 to 65°C)H-2610.20C Thermometer* (174 to 188°F)H-2600.21F Thermometer* (79 to 87°C)H-2610.21C Thermometer* (204 to 218°F)H-2600.22F Thermometer* (95 to 103°C)H-2610.22C Saybolt Viscosity Bath Accessories ASTM D88, D244, E102; AASHTO T72 DescriptionModel Tubes with Orifices Brass saybolt viscometer tube w/ stainless steel universal orifice H-2180 Brass saybolt viscometer tube w/stainless steel furol orifice H-2182 Stainless saybolt viscometer Tube w/stainless steel furol orifice H-2183 Brass saybolt viscometer tube w/stainless steel universal and furol orifice, includes wrench H-2184 Stainless saybolt viscometer tube w/ universal and furol orifice, includes wrench H-2185 Orifices Stainless steel universalH-2173 Stainless steel furolH-2174 Stainless steel furol, calibratedH-2174C Tubes Stainless steel saybolt viscometer tube H-2171 Brass saybolt viscometer tubeH-2172 H-2176 H-2175 H-2174 H-2174C H-2173 H-2177 H-2196 H-2185 H-2171 H-2172 H-2199A H-2189 Test Apparatus Setup for lubricants, insulating oils and heater fuels DescriptionQty.Model # Saybolt viscometer bath1 H-2165 H-2165.4F H-2166A H-2166A.4F Viscometer tube4H-2180 Universal orifice4H-2173 Receiving flask for H-2165 or Borosilicate flask for H-2166 4H-2176 4H-2179 Technical oil, white5H-2189 ASTM thermometer* or ASTM thermometer* 1H-2600.17F 1H-2600.17C Test Apparatus Setup for bituminous materials DescriptionQty.Model # Saybolt viscometer bath1 H-2165 H-2165.4F H-2166A H-2166A.4F Viscometer tube4H-2180 Furol orifice4H-2174 Displacement ring4H-2194 Receiving flask for H-2165 or Borosilicate flask for H-2166 4H-2176 4H-2179 Technical oil, white5H-2189 ASTM Thermometer* or ASTM Thermometer* 1H-2600.17F 1H-2600.17C CAUTION These thermometers contain mercury. There are restrictions on their sale and shipment. Please check laws in your area or contact us before ordering. Due to Illinois law, Humboldt must drop-ship these items from New Jersey. Mercury Thermometers require ground shipment in the U.S. Not sold outside United States. CAUTION *www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 273 Asphalt Binder Testing— Viscosity H-1730 H-1720 Constant Temperature Bath, 100°C ASTM D445 Specifically designed for precise viscosity deter- mination with glass capillary viscometers, the H-1720 baths offer superior temperature control to 100°C. The H-1720 offers a 12"Dia x 12"H (305mm x 305mm). bath jar that can accommo- date most viscometers. These baths maintain accurate temperature con- trol of ± 0.01°C within the range of 20°C to 100°C (±0.01°C), providing the temperature sensitivity required by ASTM D445 for kinematic viscosity measurements with glass capillary viscometers. Two electric heating elements inside the bath rap- idly heat the medium to any desired temperature within the range. The H-1720 bath chamber is a cylindrical clear glass vessel 12" dia x 12"H (305mm x 305mm). A stainless steel baffle located in the center of the bath provides a plain reflective background to aid in viewing instruments. The top cover con- tains seven round holes 2" (51mm) in diameter for insertion of viscometer holders, allowing up to seven viscosity measurements to be made simul- taneously. Covers are supplied for capping unused holes. Two additional holes 10mm in diameter, are provided for thermometers. All wetted parts of the Constant Temperature Bath are made of stainless steel or glass. The frame is fabricated from heavy aluminum and coated with a corrosion-resistant epoxy finish. Viscometers, holders, bath oil, and thermometers must be purchased separately . Dimensions: 16"w x 14.25"d x 24"h (407 x 362 x 610mm). Constant Temp. Bath, 120V 60HzH-1720 Constant Temp. Bath, 220V 50/60HzH-1720.4F Shipping wt. 80 lbs (36.2kg) Constant Temperature Bath, 150°C ASTM D445 The H-1730 constant temperature bath main- tains the accurate control required by ASTM D445 for kinematic viscosity measurements with glass capillary viscometers. The H-1730 baths offer superior temperature control to 150°C. Within the range of 20 to 100°C, temperature is controlled to 0.01°C; above 100°C temperature it is controlled to 0.03°C. The H-1730 bath chamber is a cylindrical clear glass vessel 12"dia x 12"H (305mm x 305mm). A stainless steel baffle is located in the center of the bath to provide a good background for viewing viscometers. Two fluorescent lamps illuminate the interior of the bath brightly and uniformly, with- out glare. Two heating elements inside the bath rapidly heat the bath medium to any temperature within the bath range. The top cover contains seven round holes 2" (51mm) in diameter. Up to seven glass capillary viscometers (in holders) can be placed in the bath. Other hole configurations can be supplied on special order. A solid-state control circuit, equipped with a stainless steel-encased thermistor provides pro- portional control of temperature. A motor-driven stirrer ensures a uniform temperature throughout the bath. All wetted parts of the bath are made of stainless steel or glass. The bath housing is fabricated from heavy aluminum and coated with a corrosion-re- sistant epoxy finish. Viscometers, holders, bath oil, and thermometers must be purchased sep- arately .Dimensions: 17.25"w x 18.25"d x 23"h (438 x 464 x 584mm). Constant Temp. Bath, 120V 60HzH-1730 Constant Temp. Bath, 220V 50/60HzH-1730.4F Shipping wt. 123 lbs (56kg) Digital Vacuum Regulator w/Vacuum Pump ASTM D2171 The DVR-3000 digital vacuum regulator provides precise measurement and control of vacuum at 300 mm Hg below atmospheric pressure. Vac- uum set point can be altered to any value within the operational range of 95 mm Hg to 450 mm Hg below atmospheric pressure. Solid state compo- nents contain no hazardous mercury. •Operating range: 95—450 mm Hg below atmospheric pressure ± 0.5 mm Hg •Supplied with NIST certification of measure- ment accuracy •Vacuum level displayed in mm Hg •Preset to regulate vacuum at 300 mm Hg below atmospheric pressure (consistent with ASTM D2171 requirements) •Configurable to User-Specific Needs •Vacuum set point can be effortlessly changed to fit custom applications •Trusted platform offers reliability and depend- able support •Safe, Easy-to-Use Design •Solid state components do not contain hazard- ous mercury •Easy control input •Operating Conditions: 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Instal- lation Category II; Pollution Degree 2 •Compliance: CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/ EC); HI-POT (1900 VDC, 60 sec.); ROHS •Small footprint; 16.8 cm x 25.0 cm x 18.5 cm (6.62" x 10" x 7.25") Digital,Vacuum Regulator w/Pump 120/220V 50/60HzH-1741VA.3F Shipping wt. 15 lbs (6.8kg) H-1741VA.3Fwww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 274 ASPHALT Asphalt Binder Testing— Viscosity IBF Bath Oil Oil for constant temperature baths operating at less than 135°C (275°F). 6-gallon container (2.3L) UBF Bath Oil H-1732 Shipping wt. 50 lbs (22.6kg) Bath Fluid, High-Temperature Silicone This clear, colorless, oily liquid has a nominal vis- cosity of 50 centistokes at 25°C, with a viscosity/ temperature coefficient of 0.59. The boiling point is over 360°C with a flash point above 535°F. Fluid has a maximum volatility, with 0.5% weight loss over 24 hours at 150°C. Bath Fluid, Silicone, .5 GallonH-1733 Shipping wt. 20 lbs (9.07kg) Vacuum Manifold Vacuum manifold with manual valves for applying vacuum or pressure to capillary-type viscometers. Designed for use with the H-1720 and H-1730 constant temperature baths. Integral brackets permit mounting on bath covers. Two models are available: one for the H-1730, which has four valves and one for the H-1720, which has three valves. Both Include a 10-foot length of rubber vacuum tubing, .25" bore x .625 OD, for connec- tion to vacuum/pressure regulators. Housing is epoxy-coated aluminum, overall 13"W x 2.75"D x 9"H (330 x 70 x 229mm) Vacuum Manifold for H-1720H-1745 Vacuum Manifold for H-1730H-1735 Shipping wt. 6 lbs (2.7kg) Temperature Bath Storage Pedestal This Heavy-duty, two-drawer unit provides a pedestal for constant temperature baths, as well as storage of accessories and consumables. It provides elevated viewing of the bath and ample room for storage of viscometers and other acces- sories. Dimensions: 18" W x 18" D x 6.5" H (457 x 457 x 165mm) Temperature Bath Storage PedestalH-1722 Shipping wt. 40 lbs (18.1kg) Zeitfuchs ® Cross-Arm Viscometer and Holder ASTM D445, D446, D2170; AASHTO T201; ISO 3105 These models are used to determine kinematic viscosity of liquid asphalts, road oils and distilla- tion residues of liquid asphalts at 140°F (60°C) and of asphalt cements at 275°F (135°C), requir- ing a charge of only 1 to 3ml. They are easily filled and cleaned while immersed in a temperature bath and need not be removed. The viscometers require a liquid depth of 9" (229mm). Includes round metal holder for 2" (51mm) dia. hole and certificate of calibration. Zeitfuchs ® Cross-Arm Viscometersee chart below Shipping wt. 2 lbs (.9kg) Asphalt Institute Vacuum Viscometer ASTM D2170, D2171 Designed for measurement of highly-viscous materials, such as asphalt cement at 60°C (140°F), viscometer contains a graduated capil- lary instead of timing bulbs. Applicable to mate- rials with a viscosity range of 0.036 to 80,000 poise. They require a minimum sample volume of only 3ml and require a liquid bath depth of 180 mm (7.1 inches). Includes permanently-attached, round metal holder for 2" (51mm) dia. hole and certificate of calibration. Asphalt Inst. Vacuum Viscometersee chart below Shipping wt. 2 lbs (.9kg) Zeitfuchs ® Cross-Arm Viscometer and Holder Size Approx. Constant Cs/Sec. Range of Centistokes Model 10.0030.6 to 3 H-1746.1 20.012 to 10 H-1746.2 30.036 to 30 H-1746.3 40.120 to 100 H-1746.4 50.360 to 300 H-1746.5 61.0200 to 1,000 H-1746.6 73.0600 to 3,000 H-1746.7 8102,000 to 10,000 H-1746.8 9306,000 to 30,000 H-1746.9 10100 20,000 to 100,000 H-1746.10 H-1746.7 H-1747.1 H-1733 H-1745 H-1735 H-1722 Size/ No. Viscosity Range (Poise) Approx. Constant poise/second at 300mm Hg Vacuum Model BCD 2542 to 800210.7 H-1747.1 50 180 to 3,200 843 H-1747.2 100 600 to 12,800 321610 H-1747.3 200 2,400 to 52,000 1286440 H-1747.4 400R 9,600 to 140,000 500250160 H-1747.5 800R 38,000 to 5,800,000 20001000640 H-1747.6 Asphalt Institute Vacuum Viscometerswww.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 275Asphalt Binder Testing—Viscosity, Softening Point Ford Viscosity Cups ASTM D333, D365, D1200 Used in determining viscosity of paint, lacquers and related coatings. Cup body is machined from aluminum; orifice is brass. Orifice not included with H-1530 cup, order from chart below. Cup/ Orifice combinations should be selected to pro- vide an efflux time within the 20 to 100-second range. Measurements with the Ford viscosity cup should be made at a temperature of 25°C ±0.1° (77°F ±0.2°) with a H-2610.17C (or H-2600.17F) thermometer. Order thermometers and stand separately. Ford Cup w/ No. 1 OrificeH-1530.1 Ford Cup w/ No. 2 OrificeH-1530.2 Ford Cup w/ No. 3 OrificeH-1530.3 Ford Cup w/ No. 4 OrificeH-1530.4 Ford Cup w/ No. 5 OrificeH-1530.5 Shipping wt. 1.2 lb (0.5kg) Viscosity Cup Stand Features leveling base and adjustable support bracket for H-1530 Ford viscosity cup. Viscosity Cup StandH-1535 Shipping wt. 5 lbs (2.3kg) Asphalt Viscosimeter Float Test Set ASTM D139, AASHTO T50 Used to test flow behavior or consistency of cer- tain bituminous materials and tar products via a float test. Includes calibrated aluminum float and three brass collars. Individual components can be ordered. Order thermometer separately. Asphalt Viscosimeter Float Test SetH-1400 Shipping wt. 0.6 lb (0.27kg) Cloud and Pour Point Apparatus Set ASTM D97, D117, D2500 Used to test flow characteristics of petroleum oils using cloud and pour points. Includes glass bath jar, polished brass cylinder mounted on metal tri- pod base, glass test cylinder, cork bottom disc and top rings. Order thermometer separately. Cloud and Pour Point Apparatus SetH-2560 Shipping wt. 5.3 lb (2.4kg) Cloud and Pour Components Spot Test of Asphaltic Materials Set AASHTO T102 Spot test set only for asphaltic products derived from petroleum not to be used for natural asphalts containing non-bituminous matter insoluble in xylene. Includes: 50ml Erlenmeyer flask, filter paper, 10ml pipette and rubber stopper. Spot Test of Asphaltic Materials SetH-1510 Shipping wt. 3 lb (1.3kg) Digital, Auto Ring and Ball Apparatus ASTM D36; AASHTO T53; EN 1427; BIS 2000; DIN 52011; UNE 7111 Designed for speed and accuracy, this ring and ball apparatus automatically determines the soft- ening point of asphalts and pitches. Two laser sensors detect the fall of the ball, detecting and recording the softening point of the test material. Touch-screen graphical interface allows for easy setup of the parameters and the immediate exe- cution of the test. The high-resolution color display offers all functions of a PC for the management and analysis of data, test results and graphs. Bath temperature is measured by an electronic system maintaining the gradient (5°C/min) as specified by the standard. Provides real-time visualization of the temperature/time graph for the entire test. A magnetic stirrer with electronic speed adjustment from 0 to 160rpm also ensures a uniform tem- perature in the vessel during the complete test. Unit provides the ability to test with boiled distilled water for softening points from 30 to 80°C and 80° up to 150°C using glycerol. Export data to a PC via USB flash drive or SD card with the ability to edit the data easily with Excel. Multiple languages are built in. Digital, Auto Ring and Ball ApparatusH-1567A Digital, Auto Ring and Ball ApparatusH-1567A.4F Shipping wt. 66 lb (30kg) H-1530.2 H-1535 H-1400 H-2560 DescriptionModel Metal tripod baseH-2560.1 Glass test jarH-2560.3 Glass battery bath jarH-2560.5 Brass cylinderH-2560.2 Cork disksH-2595 Cork ringsH-2598 Thermometer* -36 to 120°FH-2600.5F Thermometer* -38 to 50°CH-2610.5C Thermometer* -112 to 70°FH-2600.6F Thermometer* -80 to 20°CH-2610.6C DescriptionModel Steel ball, 9.5mm dia. H-1580 Brass, tapered ring, brass H-1575 Centering guide, brass H-1588 Beaker, 600ml pyrex H-4911.600 Calibration rods (2) H-1567.4 H-1510 DescriptionModel Float only H-1410 Collars only (set of three) H-1420 CAUTION These thermometers contain mercury. There are restrictions on their sale and shipment. Please check laws in your area or contact us before ordering. Due to Illinois law, Humboldt must drop-ship these items from New Jersey. Mercury Thermometers require ground shipment in the U.S. Not sold outside United States. CAUTION * H-1567www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 276 ASPHALT Asphalt Binder Testing—Softening Point Softening Point Apparatus, Double ASTM E28; AASHTO T53 Ring and ball method Apparatus for soften- ing point determinations for use with asphalts, pitches, tars and most resins. Includes 800ml bea- ker with brass, double set-up fixture with cover and thermometer port with stopper, 2 shouldered rings, 2 ball centering guides and 2 standard balls. Order required thermometer separately. Softening Point Apparatus, DoubleH-1569 Shipping wt. 2lbs (.9kg) Softening Point Apparatus, Quad Ring and ball method Apparatus for soften- ing point determinations for use with asphalts, pitches, tars and most resins. Includes 800ml beaker with stainless steel, quad set-up fixture with cover and thermometer port with stopper, 4 shouldered rings, 4 ball centering guides and 4 standard balls. Order required thermometer separately. Softening Point Apparatus, QuadH-1570 Shipping wt. 2lbs (.9kg) Softening Point Apparatus Set w/ Burner Single, ring and ball method softening point appa- ratus set, including burner. This set can be used for single determinations such as: asphalts, pitches, tars and most resins. Includes burner, beaker, sup- port stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Order required ther- mometer separately. Softening Point Apparatus Set w/BurnerH-1595 Shipping wt. 10lbs (4.5kg) Softening Point Apparatus Set w/ Hotplate Single ring and ball method softening point appa- ratus set, including hotplate. This set can be used for single determinations such as: asphalts, pitches, tars and most resins. Includes 6" x 6" electric hotplate as a heat source rather than a gas burner. The hotplate provides an easy-to-set analog temperature control knob with graduated scale and LED display. Temperature range is: ambient to 540°C (Ambient to 1004°F). Includes beaker, support stand, 1 ring, wire gauze with ceramic center, thermometer clamp, 1 shouldered ring and stem with hardened steel ball. Order required thermometer separately. Softening Point Apparatus Set w/Hotplate 120V 60HzH-1596 220V 50/60HzH-1596.4F Shipping wt. 18.4lbs (8.3kg)and H-8980 H-8900 H-1575 H-1588 DescriptionModel Brass, shouldered ring, Top: 23mm OD, 19.8mm ID; Bottom: 19mm OD, 15.9mm ID; Top to Shoulder: 4.4mm High; Shoulder to Bottom: 2mm High, 10 per package H-1575 Hardened steel ball, .375" 99.5mm) dia.; weight between 3.45 and 3.55g, 10 per package H-1580 Ball centering guide for shoul- dered rings, ball is centered on specimen by 3 locator pins H-1588 Ring and stem assembly with 16" (406mm) long brass wire stem with shouldered brass ring H-1602 Steel, clamp hook supports suspended thermometers. Locks into any position with check nut, Maximum distance from center of muff to hook: 4.25" (108mm), minimum distance is: 3.875" (89mm) H-8900 Thermometer clamp with adjust- able 360° muff, phosphor-bronze jaws, 3.5" (89mm) long H-8950 Thermometer clamp, similar to H-8950, but holds H-1602 ring and stem and thermometer together H-8980 Base (Cast iron) w/ Support RodH-21220 BurnerH-6220 Beaker, 800ml, Graduated H-4911.800 Hot plate, 6" x 6" with LED Display H-4942 Wire Gauze, 5" x 5" w/ceramic material center H-25865 H-1595 H-1596 Shown with Thermometers, not included, order separately H-1570 CAUTION These thermometers contain mercury. There are restrictions on their sale and shipment. Please check laws in your area or contact us before ordering. Due to Illinois law, Humboldt must drop-ship these items from New Jersey. Mercury Thermometers require ground shipment in the U.S. Not sold outside United States. CAUTION * Thermometers* for Softening Point Apparatus DescriptionModel 30 to 180°F (ASTM 15F)H-2600.15F -2 to 80°C (ASTM 15C)H-2610.15C 85 to 392°F (ASTM 16F)H-2600.16F 30 to 200°C (ASTM 16C)H-2610.16C 30 to 350°F (ASTM 113F)H-2600.113F -1 to 175°C (ASTM 113C)H-2610.113C H-1569www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300 ASPHALT 277Asphalt Binder Testing— Samplers, Flash Point H-2495 H-2400 H-2407B H-2405S Bacon Bomb Samplers, 8oz. (237ml) ASTM D4057, D6074, D1265 Bacon Bomb Samplers can be used to obtain samples from storage tanks, tank cars and drums. When the sampler is lowered into the tank and hits the bottom, a plunger assembly opens to admit the material. The plunger closes again when the bomb is withdrawn, forming a tight seal. Equipped with plunger locking cam for tight clo- sure during transport. Available in plated brass or stainless steel. 2" dia. x 10" L. (51 x 254mm). Bacon Bomb Sampler, 8oz, BrassH-2405B Bacon Bomb Sampler, 8oz, StainlessH-2405S Shipping wt. 4lbs (1.8kg) Bacon Bomb Samplers, 16oz. (473ml) ASTM D4057, D6074, D1265 Bacon Bomb Samplers can be used to obtain samples from storage tanks, tank cars and drums. When the sampler is lowered into the tank and hits the bottom, a plunger assembly opens to admit the material. The plunger closes again when the bomb is withdrawn, forming a tight seal. Equipped with plunger locking cam for tight clo- sure during transport. Available in plated brass or stainless steel. 2.75" dia. x 12"L (70 x 305mm). Bacon Bomb Sampler, 16oz, BrassH-2406B Bacon Bomb Sampler, 16oz, StainlessH-2406S Shipping wt. 6lbs (2.7kg) Bacon Bomb Samplers, 32oz. (946ml) ASTM D4057, D6074, D1265 Bacon Bomb Samplers can be used to obtain samples from storage tanks, tank cars and drums. When the sampler is lowered into the tank and hits the bottom, a plunger assembly opens to admit the material. The plunger closes again when the bomb is withdrawn, forming a tight seal. Equipped with plunger locking cam for tight clo- sure during transport. Available in plated brass or stainless steel. 2.75" dia. x 15.25"L. (70 x 387mm). Bacon Bomb Sampler, 32oz, BrassH-2407B Bacon Bomb Sampler, 32oz, StainlessH-2407S Shipping wt. 8lbs (3.6kg) Weighted Sample Beaker For beaker sampling from tank cars, tank trucks, shore tanks, ship and barge tanks. Copper con- struction with weighted bottom. Includes han- dle and chained cork. Takes all level samples, as well as running and outlet samples. Select .75" (19mm) opening for light crude oils, light lubri- cating oils, kerosenes, gasolines, transparent gas oils, diesel fuels and distillates. Select 1.5" (38mm) for heavy crude and fuel oils, heavy lubri- cating oils and nontransparent gas oils. Body is 3.375" dia. x 14"L. (86 x 356mm). Weighted Beaker, .75" (19mm) H-2400 Weighted Beaker, 1.5" (38mm) H-2401 Shipping wt. 5lbs (2.2kg) Tag, Open-Cup Flash Tester ASTM D1310, D3143; AASHTO T79 For determination flash and fire points of liquids at temperatures of up to 325°F (163 °C) and flash points of cutback asphalts at temperatures of less than 200°F (93 °C) as per test methods ASTM D1310, D3143 and related test specifications. Determines Tag Open-Cup flash point of liquid products and cutback asphalts. Includes sample test cup, plated brass liquid bath with constant level overflow, pivoting ignition taper with pilot light and reference bead, pivoting thermometer holder, heater and base. Electrically heated model is equipped with step- less variable heat control for accurate control of temperature rate of rise per specification. Gas heated model also available. Includes Tag Open Cup Flash Point Tester, borosil- icate glass sample cup, liquid bath with constant level overflow and manual. Order leveling device and draft shield separately. Order necessary ASTM 9C mercury thermometer locally. Illinois law prohibits us from selling mercury thermometers. Tag, Open-Cup Tester, 120V 60HzH-1990A Tag, Open-Cup Tester, 230V 50/60HzH-1990A.4F Shipping wt. 37.1lbs (16.8kg) Conradson Carbon Residue Apparatus ASTM D189, D2416 Tests petroleum products to determine the amount of carbon residue left after evaporation and pyrolysis of an oil and to indicate relative coke-forming propensities. Includes burner, tripod, refractory block, nickel chrome triangle, nickel cru- cible and cover, Skidmore crucible, porcelain cruci- ble and monel hood and bridge. Component parts available separately. Conradson Carbon Residue ApparatusH-2495 Shipping wt. 7.1lbs (3.2kg) H-2405B DescriptionModel Replacement Pyrex cup H-1990.1 Leveling device H-1990.2 Thermometer*, range: 20 to 230°F H-2600.9F Thermometer*, range: -5 to 110°C H-2610.9C Parts for Tag, Open-Cup Flash Tester DescriptionModel Porcelain crucibleH-2494 Skidmore crucible and coverH-2497 Carbon residue apparatus hoodH-2496 Nickel crucible with coverH-2498 Refractory block insulator ringH-2505 Parts for Conradson Apparatus H-1990ANext >